Home Stainless Steel Kitchen Sinks

Stainless Steel Kitchen Sinks

    


1、10mmradius corners, no welding


2、Premium 304 stainless steel


3、Overflow


4、European expert design


5、High-capacity bowl depth


6、The finest flatness


7、Undercoating & sound absorbing


8、Easy-draining,easy-cleaning





Raw material of Stainless steel:


SUS304 2B 18/9 Chromium/Nickel


 


Surface finish



Satin Finish
Mirror Finish
Pulley Finish
Linen Finish


Maintenance


Clean and dry the sink immediately after using, leave the sink open. Do not leave any mineral sediment in it.


If there is mineral sediment at the bottom of the sink, remove it first with dilute wax, and flush the sink with fresh water.


Do not leave any water on the surface of the sink. Water with high ferric content will cause rust.


 


Using


u       Do not leave soft iron products, hard wares or rusted materials in the sink for long, or use the sink as long-term storage.


u       Do not leave rubber placemat or wet sponge cleaner in the sink overnight.


u       Be aware of the possible damage chlorine household product, bleach and food may do to the sink.


u       Be aware of the rusting damage gas/vapor released from bleaches or any other chemical detergents in the cupboard may do to the bottom of the sink.


u       Flush the sink immediately after contacting with photographic chemicals or soldering iron dissolvent.


u       Detergents with silver or sulfur/hydrochloric acid components are possible damaging sources.


u       Do not leave pickles, mayonnaises, mustards or salt preserved products in the sink for long.


u       Do not clean the sink with iron wire or other rough cleaning tools.


u       Do not do the chopping and cutting job on the sink directly.


u       Water with high mineral content will cause white thin coatings on the surface of the sink.


u       Any misusage or incorrect cleaning methods will cause damage to the sink.


 


Note:


If any defect and flaw of welding and polishing is visible to the naked eye about 1 meter away, do not install. Please contact your supplier immediately for a replacement.


If any quality issues or non-quality issues are detected before installation, please do not install. Otherwise Oulin will not bear any indirect loss caused by the installation.

Stainless Steel Kitchen Sinks

Please contact your local Oulin Customer Service according to the address provided on the carton box for information related to quality and other problems.


 


Problems and Solutions


 


Problems

Causes

Solutions

Rust at the bottom of the sink after installation

Non-quality problem, caused by metal scraps left in the water supply pipe after house decoration.

Rusts will disappear during normal use. Or scrub rust areas with toothpaste.

Scratches

Caused by squeezing and striking during transportation and installation, non-quality problem

Please check the product at site, Oulin assumes no liability or responsibility after sale.

Partially uneven or bended

Caused by squeezing and striking during transportation and installation, non-quality problem

Please check the product at site, Oulin assumes no liability or responsibility after sale.

Black spots on the surface

Caused by squeezing and striking during transportation and installation, non-quality problem

Caused by squeezing and striking during transportation and installation, non-quality problem

Frame uneven

Caused by squeezing and striking during transportation and installation, non-quality problem

Reverse restoration, install with extra load hooks.

Finger prints on the surface

Non-quality problem

Clean with neutral detergent

Chromatic aberration on the surface

Caused by the differences of batches and polishing techniques

Chromatic aberration not visible to naked eye about 1 meter away is acceptable. No replacement is required. Otherwise replacement is available at any time.

Loose weld and weld penetration

Quality problem

Replacement available at any time if detected.


 





Recommended Products
Hot Products