48 Channels Scene Control

48 Channels SceneControl

Features
1. This scene control has48 independent sections. Each section has 99 kinds of scenes and the longestoperating time of the scene is 60 minutes.
2. There are 99 orders and each order has 99 steps. The time interval of eachstep ranges from 0.1s to 60 minutes. The running mode ofthe order is divided into forward mode, reverse mode, round-trip mode, randommode and invalid mode.
3. The protection delay time for lamps of each return circuit is 0-60 minutes.
4. The start-up in batches delay time of each return circuit is 0-25 seconds.
5. This scene control outputs FDL-NET DMX signal.
6. The switchboard is used to bidirectional switch data between FDL-BUSand Ethernet.
7. As a result of the intelligent data switching, the data traffic can bereduced.
8. The soft reset function of this scene control effects without outrage ofelectricity.
9. The electronic coded lock in it can prevent illegal modification.
10. This scene control is designed with 48 channels DMX signal output which is the 1990edition.
11. It is equipped with remote programming and managing function.
12. The scene control has the wiring function for return circuit.
13. It has built-in Ethernet interface.

Technical Parameters
1. Working voltage: DC24V
2. Current consumption of bus: 40mA/DC24V
3. Working environment
    3.1 Working temperature: 0℃～45℃
    3.2 Storage temperature: -40～ 55℃
    3.3 Working relative humidity: 20%～90%
    3.4 Storage relative humidity: 10%～93%
4. Installation way: Installed with standard 35mm guide rail
5. Size(L*W*H): 72×88×66(mm)

Welcome to Fangda! As aprofessional 48 channels scene control manufacturer in China, our companyprovides a wide range of products, including a stage lighting console, ambientlight sensor, 6 button control panel, sine wave lighting dimmer, dimmer rack, airconditioner controller, and more.