Nitrogen Dehumidifier Dryer
Mold temperature controller is the key to optimize your injection molding and operation productivity
ill with high concentration nitrogen gas to prevent raw material from yellowing caused by oxidation, improving the rate of qualified products
Features:
Equipped with American original nitrogen generator
Fully enclosed structure, nitrogen gas circulating
Drying hopper is installed above the injection molding machine
Configured with high efficiency filter
Φ38 PVC flexible tube for conveying
Specification:
| Model | NDN-10 | NDN-20 |
| Hopper capacity (kg) | 10 | 20 |
| Hot air capacity (m3/hr ) | 20 | 30 |
| Nitrogen gas concentration (% ) | 98 | |
| Drying temperature (℃ ) | 70-160 | |
| Drying blower (kw) | 0.18 | 0.37 |
| Heating pipe (kw) | 1 | 2 |
| Hopper volume (L) | 40 | |
| Conveying blower (kw) | 0.75 | 1.1 |
| Compressed air | Over 0.6mpa*20L r/min | |
| Power supply kw 380V/50HZ | ||
Photo Gallery
Scan QR to Read
Links：https://www.globefindpro.com/products/10537.html
Links：https://www.globefindpro.com/products/10537.html
Recommended Products
Hot Products
