PL06 Pressure Switch (15-2500mbar)

Send Message Request a Quote

The pressure switch can be applied to detection positive or negative pressure. It can be used as a gauge or differential pressure switch with almost no hysteresis. If 2 switch points are required, 2 pressure switches with different calibrations should be employed. The method of fixing the tab terminals to the switch body does not allow for absolute air sealing. The switch is therefore not recommended for applications where static vacuum has to be maintained. However, special models with additional pressure spring which allow for the vacuum to be connected to the pressure inlet side are available on request.

Technical Data

Model	PL06
Electrical Function	1 pole NO1 pole NC
Switch Rating	1 pole NO:2.5(0.5) A 250V~1E41 A 250 V~5E4(max 800 mbar)20 mA 250 V~5E4(max 800 mbar)1 Pole NC:2.5(0.5) A 250V~1E40.5 A 250 V~5E4(max 800 mbar)20 mA 250 V~5E4
Temperature	Ambient: -10 to 85℃
Electrical Connections	Tab terminals 6.4 x 0.8 mmTab terminals 4.8 x 0.8 mm(1 pole NO only)
Pressure Range	Pressure: 15 to 2500 mbarTolerance: /- 10% NO; /- 15% NCVacuum: -600 to -15 mbarTolerance: /- 15%
Sample Line Connections	Pressure and vacuum: Inlet 4.0 or 5.5 mm (up to 500 mbar)Threaded inlet M10 x 1 mm or 1/4 gas
Switch hysteresis	Almost no hysteresis
Max. working pressure	3000 mbar
Medium	Non hazardous gas only
Fixing Methods	Plastics clips (version with inlet only)
Materials	Lower body: PA 66
	Upper body: PA 66
	Adjust. screw: PA 66
	Contact carrying parts: Brass Silver plated (gold plating on request) Membrane: Nitrile, EPDM, (Silicone, Perbunan on request) according to application

Note: 1mbar = 100 Pa 1 in/H2O= 249 Pa

Scan QR to Read
Links：https://www.globefindpro.com/products/105805.html

Recommended Products