200kW Biomass Generator Set

Description

Model	Dimension (mm) L×B×H	Net Weight (kg)	Instruction
200GF-RG/PwG	5300×1970×2250	8100	Open cooling method for heat exchanger
	4510×1970×2260	7500	Closed cooling method for horizontal water box with more than one fan

Conditions for Using
1. Temperature of the straw gas should not surpass 40℃ when it is 1m or nearer to the pressure regulating valve for air inflow.
2. The pressure that this biomass generator set can sustain ranges from 3kPa to 10 kPa and the fluctuated frequency of the pressure should not surpass 1kPa/min.
3. The granularity of the impurity should not surpass 5 μm and its max. content is 30mg/Nm3.
4. For the straw gas used in this biomass generator set, the volume content of H2 should not surpass 20% and the max. content of H2S, NH3 and tar are 50mg/Nm3, 20mg/Nm3, and 50mg/Nm3.
5. The moisture content in straw gas should not surpass 40g/Nm3 and the heating value of the gas should not be lower than 4MJ/Nm3.
For gas that cannot reach the conditions above, special allocation will be tookfor this biomass generator set after evaluation according to the specific composition, pressure, temperature, etc. provided.

Technologies Used
This biomass generator set uses electrically fuel gas mixing technology, low-pressure air inflow technology, automatic control technology for burning and safe conveying system.

Technical Parameters

Name of Parameter	Value of Parameter
Model of the set	200GF-RG	200GF-PwG
Model of gas engine	G6190ZLDK-2A
Model of generator	1FC6 354-6LA42
Rated power(kW)	200
Rated current(A)	288
Rated voltage(V)	400
Rated frequency(Hz)	50
Rated rotated speed(r/min)	1000
Rated power factor(cosφ)	0.8(lag)
The number of phase and the wiring method	Three coils wired by three phase lines or three coils wired by three phase lines and one zero line.
Way for adjusting pressure	Automatic adjusting pressure
Excitation method	Brushless excitation
Starting up method	24VDC Electric starting system

Technical Parameters

Name of Parameter	Value of Parameter
Model	G6190ZLDK-2A
Number of cylinder	6
Arranging way of cylinders	Straightly arranged
Diameter of cylinder(mm)	190
Route(mm)	210
Total displacement(L)	35.73
Air inflow way	Increasing the pressure by using the exhaust produced by the generator to promote the operation of the turbine, thus improve the inlet pressure. The intercooler for air inflow is also used.
Rated power(kW)	210
Rated rotate speed(r/min)	1000
Min. stable rotate speed with empty load(r/min)	600
Dimension(L×B×H) (mm)	3226×1120×2005
Net weight(kg)	4500

Shengli is a major manufacturer and supplier of biomass generator se, based in China. We run our company in strict accordance with ISO9001 international quality system and ISO14001 international environmental management system. All of our coal mine gas generator set, natural gas generator set, biogas generator set are produced in strict compliance with international standard, and customers can feel secure in purchasing them. If you are in need of any of our products, please don't hesitate to contact us.