Two-part Thermal Gap Fillers, Thermal Gap Filling Gel

Two-part Thermal Gap Fillers, Thermal Gap Filling Gel

GTP-DS two-part thermal gap fillers are a two-component liquid before use, and are similar to thermal pads after curing. With a low stress, they are suitable for dispension to avoid using the entire sheet of thermal conductive materials, and therefore save product costs and reduce material weight. Two-part thermal gap fillers completely fill complex surfaces between heating components and heat sinks, effectively improving the heat dissipation efficiency.

Features

AMG provides high quality two-part thermal gap fillers for use in automatic dispensing. We also offer customized products according to your technology and cost requirements.

High thermal conductivity, max. 4.0 W/m·K No need for pre-curing. Room or elevated temperature placing after dispensing achieves the same effect as thermal conductive pads Suitable for automatic dispensing High temperature resistant Excellent insulation. With a breakdown voltage of over 8 kV/mm, it is suitable for high voltage situations Stable viscosity in storage and in applications Excellent chemical stability and mechanical stability。

Applications Handheld devices Bare die to heat spreader lid Filling gaps between heat-generating devices to heat sinks /housings Devices requiring low assembly pressure BGA, PGA, PPGA

Main Parameters
Thermal conductivity: 1.0~4.0 W/m·K
Cure: 8 hours at 25 ℃, 10 min at 100 ℃
Temperature range: -40~+180 ℃
Shelf life: 6 months from date of manufacture


Optional gap fillers