Liquid Level Controller

The liquid level controller is equipped with three contacts to start or stop the refilling function of the vessel according to liquid levels sensed by the electrodes (probes). We provide liquid level controllers with different water levels, styles, shapes and sizes.

Voltage: AC 36-380V 50V 60Hz Operating temperature: -10℃~70℃



Voltage: AC 36V-380V 50/60HZ DC 12V-DC48V Operating temperature: -10℃-50℃

The three electrodes are connected to the "e1", "e2" and "e3" terminals.

When the liquid level reaches the uppermost electrode (e1), the relay is activated, and the pump starts refilling the vessel. When the liquid level reaches the bottom electrode (e2), the relay is deactivated and the pump stops refilling.

The sensitivity (between the electrodes) is adjustable within a range of 5-100 KQ via the buttons on the front side of the relay.

Top level electrode: Top (e1) Bottom level electrode: Bottom (e2) Earth electrode: Earth (e3)






Technical parameters
Rated voltage: 230 VAC
Operating range: (0.8 -1.1)xUn (Un nominal voltage)
Frequency: 50/60 Hz
Sensitivity: 5-100K Ω adjustable
Output current: Max. 5 A/ 240 VAC
Consumption: < 4 VA
Protection: IP20
Receiver protection: IP00
Temperature: -5℃ ~+50℃
Connection: DIN rail mounted in panel
Size: 35x90x58 mm

61F-G

61F-G1

A61F-GP

Operation Temperature:10-100℃
Flow Rate:2m/s


Voltage: AV220V
Rated current: Resistive load 4A/220V
Maximum heat current: 10A 250V
Working temperature: 0-65℃
Power range: ≤500W
Working Pressure: 0.1Mpa
Level of protection: IP65






Contact rating: AC250V DC30V 50A
Rated voltage: one phase AV110V 220V 380V 50HZ
Output contact: SPDT(1)
Electrical life: 105 times
Mechanical life: 106 times
Altitude:





Contact rating: AC250V DC30V 50A
Rated voltage: one phase AV110V 220V 380V 50HZ
Output contact: SPDT(1)
Electrical life: 105 times
Mechanical life: 106 times
Altitude: