Rim Edge Conditioning Machine​

The rim edge conditioning machine is a fully automatic piece of equipment used for removing burrs after rim rolling. It uses a cold rolling method to trim the edge until its smooth, fulfilling requirements for an improvement in rim quality. This edge conditioner is used to process small wheel rims, and features a wide processing range, a high overall accuracy, and a compact structure. The automatic system produces a high working efficiency.

Features Operation process

Feeding - roller automatic downward pushing - rotating - deburring - roller releasing - discharging - discharging device lowering - blanking reparation - workpiece automatic feeding.

The rim edge conditioner is highly automatic and features a compact structure and high working efficiency.

Full-automation

Single-action, manual and automatic operation modes are available. PLC controlled operating is safe and reliable.

HMI allows for manual recording of processing parameters for different rim models and stores them for later recall. HMI also displays set conditions and real time equipment external signal status.
Loading and unloading width, height of pinch roller, and other parameters can be adjusted for processing different wheel rim models.
The two rotary roller frames (left and right) can be adjusted within a speed range of 120-200rpm. The upper press roll is pneumatically operated and is adjustable in press from 4 to 8kg/cm². The loading and unloading frame is adjusted within a 6"-16.5" width. All process control, position control and workpiece displays use a digital contactless induction display for a clear display.
The green light indicates safe and normal operations. A red light will flash and alarm in the event of a failure, which will be displayed for a quick diagnosis and repair. For changing products, simply replace the die and adjust the deburring roll angle in as little as 4 minutes.