Heat Shrink End Cap

Heat Shrink End Cap, SBRS-CAPS Model: SBRS-CAPS Adhesive-lined heat shrinkable insulating end cap

SBRS-CAPS heat shrink end cap is an adhesive-lined heat shrinkable insulating end cap with 4:1 shrink ratio, specially designed for insulation, sealing and protection of varying end or stub splices in wiring harnesses and electronic assemblies.

Features 4:1 shrink ratio allows few sizes to cover a wide range of splices Sealing and protection against water, moisture and chemical Adhesive bonds readily to PVC, XLPE and PP-EPDM cable jackets Shrinks rapidly for quick installation Continuous operating temperature: -45℃～125℃ Minimum shrinking temperature: 125℃ Technical Data

Property	Test Method	Standard Performance	Typical Performance
Tensile strength (MPa)	ASTM D 2671	≥10.4	11.5
Elongation (%)	ASTM D 2671	≥300	450
Tensile strength after aging (MPa)	UL224 158℃×168hr	≥7.3	8.5
Elongation after aging (%)	UL224 158℃×168hr	≥200	350
Dielectric strength (kV/mm)	IEC 60243	≥15	17.5
Volume resistivity (Ω.cm)	IEC 60093	≥1×1014	2.5×1014

Dimensions

Order Code	Size (mm)	Standard Length (mm)	Expanded	After Recovery
			Internal Diameter (mm)	Internal Diameter (mm)	Total Wall Thickness(mm)	Outside Layer Thickness (mm)	Adhesive Thickness (mm)
CAPS-1	3.2	22	≥3.2	≤0.8	1.20±0.30	0.64±0.20	0.56±0.20
CAPS-2	4.8	25.4	≥4.8	≤1.3	1.52±0.30	0.76±0.20	0.76±0.20
CAPS-3	6.4	8.42	≥6.4	≤1.52	1.91±0.30	1.00±0.20	0.91±0.20