Automatic Edge Trimming Machine

Used for automatic removal of burrs and exceed materials from PV module edges after lamination

An automatic trimming machine is used to automatically remove burrs and exceed materials from PV module edges after lamination. The trimming machine can adapt to different sizes and shapes of panels and has a series of merits like high trimming quality, precision and speed, low noise and easy operation. Using the trimming machine can boost the production efficiency and product quality.

Technical Parameters

Item	Parameters
Panel size	(1,580-2,650)*(1,000-1,500) mm
Cycle time	≤20s
Tailing treatment	Motor rolling/cylinder clamping
Knife replacement time	≤180s
Life of knife	≥100,000 times
Positioning accuracy	±1mm
Breakage rate	≤0.001% (monthly average)
Blocking and aligning methods	The front cylinder for blocking, and the cylinders on both sides for aligning
Glass type	(1,580-2,650)*(1,000-1,500)mm
Overall dimensions (L*W*H)	3,450mm*2,360mm*1,550mm
Voltage	3 phase 5 wire 380V, 50Hz, AC±20%
Power	4kW
Air pressure	510L/min

Features
The cutting surface of the leftover material is glossy, and there is no adhesion with the panels;
There is storage space and a waste collection device inside the trimming machine for easier cleaning;
Product specification can be changed on touch screen;
The trimming machine can be automatically or manually operated and store a large quantity of data;
The trimming equipment is driven by a servo motor and a synchronous belt and guided by a linear guide, ensuring positioning precision and operation stability.