Thermally Conductive Silicone Adhesive, ZS-NJ-D935W

ZS-NJ-D935W RTV Silicone Adhesive Sealant Description

ZS-NJ-D935W RTV silicone adhesive sealant is a single-component, thermally conductive, dealcoholized silicone sealant which cures at room temperature. Designed with a high thermal conductivity coefficient to provide excellent adhesion to numerous metals including aluminum, stainless steel, etc. This sealant features outstanding dielectric property and thermal resistance in a temperature range of -60℃～200℃. The product produces alcohols when curing, but causes no corrosion to substrates like PC, copper, etc. Conforms to EU RoHS standards.

Typical applications Bonding chip to heat sinks Bonding intelligent control module of silicone controlled rectifiers to heat sinks Filling and bonding between high power electrical module and heat sinks Technical specs

Uncured properties	Appearance	White, paste
	Tack free time (min)	≤10
	Cure through time (d)	3～7
Cured properties	Specific gravity(g/cm3)	2.00～2.15
	Hardness (Shore A)	78～88
	Tensile strength (MPa)	≥2.0
	Shear strength (MPa)	≥1.5
	Elongation (%)	≥40
	Temperature resistance (℃)	-60～200
	Volume resistivity (Ω·cm)	≥1.0×1014
	Dielectric Strength (kV/mm)	≥13
	Thermal Conductivity [W/(m·k)]	≥1.0

Note:
The performance data above are measured 7 days after curing at 25℃ and 55% relative humidity. The product cures tack free more slowly as the storage time increases. Zhaoshun cannot assume responsibility for different results obtained under different conditions or caused by product improvement.