Meters and Measurement Devices for Exact Consumption Data Acquisition

Send Message Request a Quote

This ultrasonic flow meter (cast iron, flange type) is specially designed for large pipelines with a nominal diameter of 250mm-1000mm. It is used to measure the flow rate in an open type channel like irrigational canals, huge pipes and other locations.

Meters and Measurement Devices for Exact Consumption Data Acquisition

This flow meter’s line is made using carbon steel, featuring a higher hardness. This gives it a better wear resistance, and a longer lifespan that does not change, whether it is used in open air or underwater.

Parameters
Line material: cast iron Connection type: flange type Nominal diameter range: DN50-DN1000 Pressure rating: PN25 Water-proof grade: IP65 Optional models

Nominal diameter/DN	Pressure/ MPa	Length/ L(mm)	Outer flange diameter/ D(mm)	Bolt center diameter/ D1(mm)	Bole hole size×count/ Φx×n	Sealing surface diameter/ D2	Sealing surface thickness/f	Flange thickness /c(mm)
50	1.6	280	165	125	18b×4	99	3	20
65	1.6	200	185	145	18h×4	118	3	20
80	1.6	225	200	160	18×4	132	3	20
100	1.6	250	220	180	18×8	156	3	22
125	1.6	275	250	210	18×8	184	3	22
150	1.6	300	285	240	22×8	211	3	24
200	1.6	350	340	295	22×12	266	3	24
250	1.6	450	405	355	26×12	319	3	26
300	1.6	500	460	410	26×12	370	4	28
350	1	550	505	460	22×16	428	4	30
400	1	600	565	515	22×16	482	4	30
450	1	700	615	565	22×20	532	4	30
500	1	800	670	620	22×20	585	4	32
600	1	1000	780	725	22×20	685	5	36
700	0.6	1100	860	810	22×24	772	4	40
800	0.6	1200	975	920	22×24	878	4	44
900	0.6	1300	1075	1020	22×24	9781	4	48
1000	0.6	1400	1175	1120	30×28	1078	4	52