1kV Two Core to Five Core Heat Shrink Breakout Boot

Send Message Request a Quote

The heat shrink breakout boot is made of a cross-linking polyolefin and hot-melt adhesive, and is placed on the core branch of multiple core cables in order to offer a full coverage when transitioning from a single cable to multiple cables, and will shrink when heated. The primary material is a soft and elastic, pollution free EVA.

Product index
1kV two core heat shrinkable branch tubes

Type and specification	Inner hole size (before shrinking / after shrinking)		Cross sectional area of applicable cable (mm2)
Type and specification	Large end	Small end	Cross sectional area of applicable cable (mm2)
ZT-2.0	21/12	11/3.0	10-16
ZT -2.1	28/17	11/5.4	25-50
ZT -2.2	47/23	26/8.0	70-120
ZT -2.3	72/31	40/11.8	150-240
ZT -2.4	88/43	38/13.8	300-500

1kV three core heat shrinkable branch tubes

Type and specification	Inner hole size (before shrinking / after shrinking)		Cross sectional area of applicable cable (mm2)
Type and specification	Large end	Small end	Cross sectional area of applicable cable (mm2)
ZT -3.0	46/21	11/15	10-16
ZT -3.1	54/22	24/6.4	25-50
ZT -3.2	60/28	28/7.8	70-120
ZT -3.3	73/32	30/10	150-240
ZT -3.4	88/43	38/13.8	300-500

1kV four core heat shrinkable branch tubes

Type and specification	Inner hole size (before shrinking / after shrinking）		Cross sectional area of applicable cable (mm2)
Type and specification	Large end	Small end	Cross sectional area of applicable cable (mm2)
ZT -4.0	34/15	13/3.5	10-16
ZT-4.1	43/22	15/5.5	25-50
ZT -4.2	65/29	26/9	70-120
ZT-4.3	82/36	33/12	150-240
ZT -4.4	90/45	40/15	300-500

1kV five core heat shrinkable branch tubes

Type and specification	Inner hole size (before shrinking / after shrinking)		Cross sectional area of applicable cable (mm2)
Type and specification	Large end	Small end	Cross sectional area of applicable cable (mm2)
ZT -5.0	35/21	11/3.5	10-16
ZT -5.1	52/25	16/15.5	25-50
ZT -5.2	80/40	26/9.5	70-120
ZT -5.3	95/44	33/12	150-240
ZT -5.4	100/50	40/18	300-500