Tunnel Car Wash Equipment CC-690 (9-Brush)

This tunnel car wash system features 9 brushes, and will wash every aspect of a car, all while using less water and a lower power consumption. This car wash system improves washing efficiency, saves utilities, and increases customer profits, making this conveyor car wash a popular system among our customers.

Parameters Advantages Details Configurations Parameters

Model	CC-690
Dimension	L*W*H: 9.5m×3.8m×3.44m
	Conveyor 11.6 m (including car wheel guide devices)
Assembling Range	L*W: 11880mm×3800mm
Voltage	AC380V 50Hz (5 wire system)
Water Supply	DN25mm water flow rate≥200L/min
Air Pressure	0.75～0.9Mpa/ air flow rate≥0.1m³/min
Ground Flatness	Deviation≤10mm
Applicable Vehicles	Sedan/jeep/minibus within 10 seats
Applicable Car Dimension	L*W*H: 5.2m×2.15m×2.2m (wheelbase≤3.2m)
Washing Efficiency	55-60 cars/h
Small Vertical Brush	4
Large Vertical Brush	4
Overhead Brush	1
Water Consumption	95-140L/car
Power Consumption	0.6kwh/car
Shampoo Consumption	7ml/car
Water Wax Consumption	12ml/car

Advantages The galvanized frame of the tunnel car wash system is both solid and durable. The high pressure wash system improves the washing performance. The foam and water wax proportioning system is easy to use. Four groups of powerful dryers. The liquid automatic siphon is simple to operate. Multiple cleaning and long term washing completely washes the car, and ensures a superior washing performance. The PLC fully-automatic computer control system ensures a higher security. A one-click washing method is easy to operate. The contour-following drying system creates a better drying performance. The built-in self-diagnosing system will recognize and remove any mechanical obstacles during the washing process. Details
Non-welded hot-dipped galvanized steel frame
SITI Motor
Air dryer Foam brushes After years of research and development, 4th generation of swallow-tailed foam brushes contain an appropriate proportion of rubber and thus prevent potential risks. Foam brushes have great capacity to retain water, which incredibly improve the washing effect.

The conveyors automatically move the car to complete the whole process from pre-soak rinse to air drying. Tunnel car wash equipment CC-690 (9-Brush) can clean cars continuously.

Features Easy to manage; Various combinations of car wash methods; High efficiency: it can wash 45 to 55 cars per hour. Low energy consumption: on average, it consumes 150 L of water and 0.6 kWh of electricity per vehicle. Control panel Being enclosed Water proofing Long life of the circuit board Conveyors Suitable for various types of cars Equipped with P209 pillow block bearing Long service life Convenient to maintain Dryers Integral top dryers on both sides High-pressure air drying effect Move vertically to adapt to various cars Signals at the entrance Red cross and green arrow signal light; Easy to notice Width Tunnel car wash equipment CC-690 is 3.8 meters in width 2.2 meters for car wash is much safer Configurations

Standard Devices	Optional Devices
Brush system	Undercarriage wash system
Hot dip galvanized frame	High-pressure water devices
Shampoo spray system
Water wax spray system
Contour-following drying system
Car entry guide rail apparatus
Equipment data intellectualization
Self-diagnose system