Tunnel Car Wash Equipment CC-650 (5-Brush)

This tunnel car wash system features 5 car brushes: 1 vertical lift overhead brush, 2 small vertical brushes and 2 large vertical brushes. The galvanized frame of this car wash system is both solid and durable, and the control system is a fully automatic PLC computer control system, which improves security levels. For more details, please see the table below.

Parameters

Model	CC-650
Dimension	L*W*H: 6.2m×3.8m×3.44m
	Conveyor 9.15m (including car wheel guide devices)
Assembling Range	L*W: 9430mm×3800mm
Voltage	AC380V 50Hz (5 wire system)
Water Supply	DN25mm water flow rate≥200L/min
Air Pressure	0.75～0.9Mpa/ air flow rate≥0.1m³/min
Ground Flatness	Deviation≤10mm
Applicable Vehicles	Sedan/jeep/minibus within 10 seats
Applicable Car Dimension	L*W*H: 5.2m×2.15m×2.2m (wheelbase≤3.2m)
Washing Efficiency	55-60cars/h
Small Vertical Brush	2
Large Vertical Brush	2
Overhead Brush	1
Water Consumption	95-140L/car
Power Consumption	0.6kwh/car
Shampoo Consumption	7ml/car
Water Wax Consumption	12ml/car

Advantages The galvanized frame of this tunnel car wash system is both solid and durable. The high pressure wash system improves the washing performance. The foam and water wax proportioning system is easy to use. One group of lift dryers. The liquid automatic siphon is easy to operate. Multiple cleaning and long term washing applications will fully rinse the car and ensure a full washing performance. A PLC full-automatic computer control system ensures a higher security. The one-click washing method is easy to operate. The contour-following drying system ensures a better drying performance. Configurations

Standard Devices	Optional Devices
Hot dip galvanized frame	Undercarriage wash system
Shampoo spray system	High-pressure water devices
Water wax spray system
Contour-following drying system
Car entry guide rail apparatus
Equipment data intellectualization
Self-diagnose system