Linear Actuators & Electric Motion Control Products Manufacturer

The U5 model motorized linear actuator is a slipper type linear actuator, which saves space and is easy to install. It is a motorized linear actuator, applicable for massage chairs, electric sofas, electric beds, and smart furniture. It is made of an aluminum alloy, and the slider and gear box are made using a plastic material that produces very little noise during operation. The maximum push force reaches up to 6,000N.

The slipper type linear actuator is easily installed with a stroke that is less than the length of the actuator body, which makes it ideal for use in electric furniture.

The U5 motorized linear actuator is equipped with a universal power adapter and fashionable manual controller.

Parameters

Voltage: 12/24V DC
Max load capacity: 6000N (push), 3000N (pull)
No-load velocity: 5.4~58mm/s
Full-load velocity: 2.9~30mm/s
Noise level: less than 52dB


Features

The linear actuator features a large maximum load capacity, a high speed, a high positioning accuracy, and an excellent self-locking performance.
It is equipped with a built-in limit switch. The motor will automatically turn off at the end of each stroke.
It features a small size, large maximum load capacity, and low weight.
This product is designed with a strong and durable structure.
It carries out a variety of functions, including lift, drop, tilt, and rotate.
A manual controller and power source is optional.
This linear actuator is widely used in electric massage sofas, electric beds, massage chairs and other electric or motorized furniture.


Appearance and size

Curve graph

① Load VS Curent; ② Current (A); ③ Load (N); ④ Load VS Speed; ⑤ Speed (mm/s)

Code of Parameters

code	Rated laod（N）		Rated current（A）	Rated speed（mm/s）
	Push	Pull		No-load(32VDC)	Full-load(24VDC)
Standard motor (2600RPM)
A	6000	3000	5	5.4	2.9
B	5000	3000	5	7.1	3.9
C	3000	3000	4.5	11	6.2
D	2500	2500	4	15.8	7.8
E	2000	2000	5	22.5	13
F	1200	1200	4	33	19
G	700	700	4.5	44.5	23.6
High Speed Motor(3400RPM)
H	6000	3000	5	7	3.9
I	5000	3000	5	9.2	4.6
J	3000	3000	4.8	14.6	8.2
K	2500	2500	4.5	21	11
L	2000	2000	4.5	29.2	16
M	1200	1200	5	43.5	23
N	700	700	4.5	58	30

Comment: when the voltage changes from 24V to 12V, the current will be doubled.

Customization parameter

1=12V
2=24V(standard)

1=Plastic clevis, slot 6.2mm, hole Φ10.2mm
C=Customization

1=no
2=L type dead plate
C=Customization

1=straight
2=coiled

1=0.5m
2=1m
3=1.5m
4=2m
5=3m
C=Customization

1=Switches in both end off to stop
2=Switches in both end off to stop and a third one off to output signal
3=Switches in both end off to output signal
4=Both end and a third one for signal output
C=Customization

1=Tined leads
2=01 pin
3=Y cable( 01pin, Din 5 pin)
C=Customization

1=no
3=One four-and-a-half-cycle torsional spring
2=One three-cycle torsional spring
4=motor brake