Die Cutting Foil Stamping Press 1050-C type Hot Foil Stamping Cutting Line

Hot Foil Stamping Equipment Manufacturer

Description
The die cutting foil stamping press 1050-C type hot foil stamping cutting line adopts a transverse foil pull system, making it more suitable to run large-format die-cutting and single-color pattern stamping of different sizes of papers, carton boards and corrugated boards. And the maximum stamping speed is up to 6000 sheets per hour.

This die cutting and foil stamping equipment has outstanding resistance to high temperature, making it able to perform hot stamping at 200℃. Besides, it can also cool the high-temperature boards.

Processed materials Paper Carbon board Corrugated board Parameters
Processed materials

Paper	80 g/m²
Maximum carbon board	2000 g/m²
Maximum corrugated board	4 mm

Capability

Min. Sheet size	350 x 400 mm
Max. Sheet size	740 x 1050 mm
Speed	7500 sheets/h
Max. Foil stamping speed	6000 sheets/h
Die-cutting force	300 Ton

Converting

Max. stamping size	580 x 1020 mm
Max. Die-cutting size	730 x 1040 mm

Heating system

Heating zones	12 units
Max. temperature	200 ºC

Foil equipment

Foil length	120 to 1200 m
Foil width	50 to 630 mm
Web advance shafts	2

Pile height

Feeder	1650 mm
Max. Feeder with non-stop	1270 mm
Delivery	1300 mm

Dimensions and Weight

L x W x H	6.13 x4.28x3.26m
Weight	16.5Ton

Installation

Power	35 kW
Compressed air	6 bar
Air compressor capacity	30 m³/h
Air tank capacity	155 L

Die Cutting and Foil Stamping Presses Components Feeder section Continuous feeder without interruptions, feeding through pallets or carts Material loading by pallets or carts Designed with 4 lifting suckers and 4 forwarding suckers, ensuring smooth feeding of cardboard and corrugated board with different thicknesses in an efficient, reliable, and precise manner Double sheet detector Register table Quick changeovers, easy adjustment for sheet size The sheet alignment on the side can be easily made on the register table with guide rails. 4 front register lays, independently adjustable Press section The die cutter chase is designed with a central positioning system for fast positioning of the die. Cutting die with 5 mm thickness The pressure can be easily adjusted through the touch screen. Adopting over-pressure protection avoids any damage in the press. Available with manual or automatic lubrication system. 7 light weight gripper bars Changer-over bracket for cutting chase and honeycomb chase. Pneumatic lock and release system for cutting chase and honeycomb chase. Foil stamping system The heating system features 12 temperature zones with individual temperature control. Foil break detector Foil fasten device Foil unwind device Honeycomb chase Delivery section Automatic delivery with non-stop curtain Transverse foil stamping system 2 foil rolls in a high precision transversal foil feeding system.