Digital IGBT Inverter Plasma Cutter

Main Parameters
Cutting Thickness: 30mm
Applicable Power Supply: Three Phase
Rated Input Voltage: 380V
Rated Input Power: 10.5kW-23kW
Rated Input Current: 17.2A-37.6A
Open Circuit Voltage: 300V
Protection Class: IP23
Insulation Class: H
Cooling System: Forced air cooling

Our CUT80/100/120/160H series IGBT inverter plasma cutter features an outstanding durability and works with an HF (high frequency) arc start mode. The cutter is designed to work with a three phase power supply.

It is widely used for the cutting of metal plates or tubing in a variety of industries, including steel construction, manufacturing industry and automotive repair and restoration. Typical materials cut with the plasma cutter include steel, stainless steel, aluminum, lead, titanium, nickel-based composite metal, cast iron, and more.

Features Our CUT80/100/120/160H series IGBT inverter plasma cutter works with a default HF (high frequency) arc start mode to ensure an easy arc striking. Plasma cutters with a non-HF start mode are also available. The IGBT inverter works with a frequency up to 100kHz, thus ensuring the plasma arc has access to a concentrated energy. As a result, a, high cutting speed, clean and smooth cut and very little distortion are all achieved. The plasma torch's forced air cooling system ensures a high efficiency cooling, thus significantly enhancing the service life of all torch components. The front panel is designed with a knob for adjusting the gas pressure and a digital display screen for visual display of the cutting current. Built-in overheat, overcurrent, overvoltage, and under voltage protection circuit ensures safe operation. Both regular 2T and semi-automatic 4T modes are supported, accommodating different operating habits. In 2T mode, the operator will need to hold the switch down during the entire cutting process. Once the switch is released, cutting stops. In 4T mode, the operator simply needs to toggle the switch on, let go and then cut and toggle it off when finished. Technical Parameters

Model	CUT80H	CUT100H	CUT120H	CUT160H
Cutting Thickness	30mm	30mm	30mm	30mm
Rated Input Voltage	3P 380V	3P 380V	3P 380V	3P 380V
Frequency	50/60Hz	50/60Hz	50/60Hz	50/60Hz
Rated Input Power	10.5KW	14.1KW	18.1KW	23.0KW
Rated Input Current	17.2A	23.1A	29.5A	37.6A
Output Current Range	30-80A	30-100A	30-120A	30-160A
Duty Cycle(40°C 10min)	60%80A, 100%62A	60%100A, 100%77A	60%120A, 100%93A	60%160A, 100%124A
Open Circuit Voltage	300V	300V	300V	300V
Efficiency	Above 85%	Above 85%	Above 85%	Above 85%
Power Factor	0.73	0.73	0.73	0.73
Protection Class	Ip23	Ip23	Ip23	Ip23
Insulation Class	H	H	H	H
Cooling System	AF	AF	AF	AF
N.W	28.0KG	28.5KG	40.0KG	56.0KG
G.W.	32.5KG	33.0KG	42.0KG	59.0KG
Packing Dimension	640×440×535mm	640×440×535mm	710×440×605mm	800×470×635mm

Customization
The appearance, cutting current, product manuals and packaging can all be customized according to customer requirements.

Accessories Plasma Torch Earth Clamp Mask Hammer Brush PU Tubing