Multifunction Pool Heat Pump

Send Message Request a Quote

Introduction
The multifunction pool heat pump features an electrically driven compressor to recycle the refrigerant. It integrates air conditioning and heating, dehumidification, air circulation, and maintains constant pool water temperature.

Technical parameters

Item \ model						WSH150		WSH200	WSH250	WSH300
Refrigerating capacity				kW		24.6		32	38	51
Heat capacity of air				kW		29.7		38.6	45.8	61.5
Heat capacity of pool water				kW		30.2		39.3	46.6	62.6
Power of compressor				kW		5.8		6.75	9.0	10.1
Standard rated power				kW		7.2		8.3	11.8	13.2
Dehumidification capacity				kg/h		16		21	26	33
Power supply						380V 3N~50Hz
Air blower and draw blower		Supply air rate (optional)		m³/h		2500~5000	3500~7000		4000~8000	4000~11000
		Exhaust air rate (optional)		m³/h		0~5000	0~7000		0~8000	0~11000
		Wind pressure range		Pa		100~500
		Fan type				Centrifugal
Compressor				type		Scroll
				quantity		1	1		1	2
Pool water heat exchanger	Type					Special plastic shell titanium alloy heat exchanger for swimming pool
	Pipe diameter					DN32	DN40		DN40	DN65
	Depressurization of water					30kpa	30kpa		30kpa	40kpa
	Water side pressure resistance					1.0MPa
	Influent and effluent water quantity			m³/h		4.2	5.5		6.5	8.8
	Maximum water temperature			℃		45
Optional auxiliary heater				Type		Hot water coil heating / steam heating / electrical heating
				Heat capacity		5~50kw
Optional form of condenser						Air cooled fin type / water cooled shell and tube type / double cold source falling film evaporation
Air cooled outdoor condenser			Outline dimension		length × width × height	1432 × 630 × 1564	1432 × 630 × 1564		1920 × 1100 × 1435	1808 × 800 × 1220
			Net weight		Kg	200	250		300	500
Indoor unit			Outline dimension		length × width × height	2800 × 1250 × 1180	2800 × 1250 × 1180		2800 × 1250 × 1180	4010 × 2000 × 1880
			Net weight		Kg	350	400		450	600

The above parameters may be changed due to improved product performance. Our company reserves the right to change the design of products due to the improvement of the product performance without previous notice. Please take the nameplate parameters as the criteria.

Features of the unit
1. control system
Automatic control technology is adopted in the unit control to collect and analyze key temperatures and humidity data set up in the system, thus determining the most energy saving operation mode.

2. With a non-standardized directional design, a variety of combination modes are available. The requirements of various projects can be satisfied with simple adjustments.

3. Fully closed copeland scroll compressor from the United States, with the compressor and the host system independently designed.

4. Evaporator and surface cooler
The evaporator and the surface cooler adopt a copper tube aluminum fin type design, and special anticorrosion spray coating materials (epoxy resin layer etc.), to ensure that they are not corroded by the air, which may contain chlorine or other corrosive elements

5. A special anticorrosion treatment is also used in the shell of the unit.

6. Runner or plate type fresh air total heat recovery module to reduce energy loss (optional function)

7. Super high efficiency double cold source falling film evaporation outdoor condenser (optional function)

8. Aeration and purification (optional function)
The high efficiency filter element, anion dedusting, total oxygen increasing module and other functions can be equipped.

9. With the negative pressure design, the exhaust air volume is controlled by about 10% more than the new air volume to avoid the influence of the chlorine containing air on the adjacent rooms in the pool space.

10. The titanium alloy heat exchanger is used on the water side of the heat pump pool, which is of strong corrosion resistance.

11. Multiple protection functions
Overload protection, high and low pressure protections, etc.

Scan QR to Read
Links：https://www.globefindpro.com/products/31881.html