MIG Welding Machine / Inverter Welder

MIG 135E Features Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology; Available to 1kg flux-cored self-shield wire, actually welding without gas; Synergy, greatly reduce difficulties to adjustment, especially for new welding operator; Stable welding performance on small current around 20A, enhancing the capacity to weld thinner metal; Lower spatter than that of general flux-cored welding machine; Wire inching function act as you press the trigger about 3s under no load; Fan as needed, reduce noise and dust inside the machine;
Intelligent protection: over-current, over-voltage, over heating protection; Specifications

Model	MIG 135E
Power supply (V)	1 phases 120V±15%	1 phases 230V±15%
Frequency (Hz)	50/60	50/60
No-load voltage (V)	55	58
Rated input current (A)	21.4	13.4
Output current range (A)	45 - 90	45-90
Output voltage range (V)	16.3 - 18.5	16.3 - 18.5
Duty cycle	20% @90A	20% @ 90A
Power factor	>0.7	>0.7
Efficiency (%)	≥80	≥80
Type of wire feeder	Internal	Internal
Welding wire diameter (mm)	0.8	0.8
Insulation class	Class F	Class F
Protection grade	IP21S	IP21S
Weight without wire drive roll (kg)	5.4	5.4
Dimensions (L×W×H) (mm)	318×135×240	318×135×240

Package Included

MIG welding torch

Ground clamp & cable assembly

Power cord

2m shoulder strap

E71T-GS self-shielded flux-cored wire (Ø0.8mm)
Applications
Optional Welding Accessories

Steel welding wire brush

Welding safety goggles

Hand-held welding shield

Welding gloves

E71T-GS self-shielded flux-cored wire (Ø0.8mm)

Wire feed drive roll