MIG/MMA Welder / Inverter Welding Machine

MIG 251GE Features Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology; Available to 5kg flux-cored self-shield wire, actually welding without gas and add hand welding function; Synergy, greatly reduce difficult to adjustment, especially for new welding operator; Stable welding performance on small current around 40A, enhancing the capacity to weld thinner metal and 0.8mm sheet, spot welded without perforation; Lower spatter than that of general flux-cored welding machine; Wire inching function act as you press the trigger about 3s under no load; Fan as needed, reduce noise and dust inside the machine; Intelligent protection: over-current, over-voltage, over heating protection; Specifications

Model	MIG 251GE
Power supply(V)	1 phases 230V±15%
Frequency(Hz)	50/60
No-load voltage(V)	61
Rated input current(A)	27 (MIG)
	27.2 (MMA)
Output current range (A)	50 - 160 (MIG)
	40 - 140 (MMA)
Output voltage range (V)	16.5 - 22 (MIG)
	21.6 - 25.6 (MMA)
Duty cycle	20%
Power factor	≥0.65
Efficiency (%)	≥80%
Type of the wire feeder	Internal
Welding-wire diameter (mm)	0.8/1.0
Insulation class	F
Protection grade	IP21
Weight without wire roller (kg)	6
Dimension(L*W*H mm)	418*178*270

Package Included

MIG welding torch, 1pc

Welding cable quick connector, 2pcs

Ground clamp & cable assembly, 1 set
Allen key, 1pc Applications
Optional Welding Accessories

Ground clamp & cable assembly

E71T-GS self-shielded flux-cored wire (Ø0.8mm)

ER50-6 MIG solid welding wire

Electrode holder & cable assembly

Welding chipping hammer

Welding gloves

Welding safety goggles
Hand-held welding shield