MIG/MMA Welder / Inverter Welder

MIG 200E Features Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology; Available to 5kg flux-cored self-shield wire, actually welding without gas and add hand welding function; Synergy, greatly reduce difficult to adjustment, especially for new welding operator; Stable welding performance on small current around 40A, enhancing the capacity to weld thinner metal and 0.8mm sheet, spot welded without perforation; Lower spatter than that of general flux-cored welding machine; Wire inching function act as you press the trigger about 3s under no load; Fan as needed, reduce noise and dust inside the machine; Intelligent protection: over-current, over-voltage, over heating protection; Specifications

Model	MIG 200E (V1B3)
Input voltage (V)	1P/220V (±15%)
Frequency (Hz)	50/60
No-load voltage (V)	55
Rated input current (A)	23.7 (MIG) 22.7 (MMA)
Output current adjusting range (A)	60 - 140 (MIG) 50 - 120 (MMA)
Output voltage (V)	17 - 21 (MIG) 22 - 24.8 (MMA)
Duty cycle	15%
Power factor	≥0.62
Efficiency	≥81%
Type of wire feeder	Internal
Welding wire diameter (mm)	0.8/1.0
Insulation class	Class F
Protection grade	IP21
Net weight (kg)	5.5
Dimensions (L×W×H) (mm)	401×176×260

Package Included

MIG welding torch, 1pc

Welding cable quick connector, 1pc

Ground clamp & cable assembly, 1 set
Allen key, 1pc Applications
Optional Welding Accessories

E71T-GS self-shielded flux-cored wire

Welding contact tip

Welding contact tip

Electrode holder & cable assembly

Steel welding wire brush

Welding gloves

Auto-darkening welding helmet
Nozzle shield cup