Focal length | 100mm/125mm |
Max. laser power | 1000W, 1500W, 2000W |
Nozzle aperture | 6mm |
Auxiliary air pressure | <1.0Mpa |
Connector type | QBH |
Laser source | Raycus, IPG, etc. |
Laser wavelength | 1070nm |
Fiber length | Standard 8-10m, up to 15m |
Working mode | Continuous / Modulation |
Welding speed | 0~120 mm/s |
Collimating lens | 50mm |
Cooling water | Industrial thermostatic water tank |
The control card supports lasers of most international brands. It has DIP switch allowing for changing to a 5V laser control signal, which is suitable for new type IPG laser. It is designed with several protection measures to avoid safety hazards caused by misoperation, incorrect wiring or current interference.
Laser control Power: adjustable power rate Frequency: 50-30000Hz Duty cycle: adjustable percentage Laser head control Mode: 6 spot modes are optional Frequency: 2-46Hz (one Hertz corresponds to motor swing 10 times per second) Width: 0-5mm (adjustable light spot) Send Us A MessageSee Also Tags: contour cutting machine