Home Solar Water Heater

Solar Water Heater

<span >Solar Water Heater</span>











Solar Water Heater

The solar water heater we supply here can be divided into heat pipe type andflat plate type or the integral type or the split type according to differentstandard. It comes in pressurize or unpressured systems. A common sanitary domestic water heating system usually comes with thesolar collector, hot water tank, stand profiles and reflector. It is able toprovide 70% of energy required for water heating throughout the year andpractically 100% during the summer. Environmental friendly, highly reliable aswell as competitively priced, the solar water heater has been widely acceptedamong customers at home and abroad. 

Working Principle of HeatPipe Vacuum Tube Integral Type


美工注意,此处放置图 1,以下文字替换图片1上的文字:


Thermosiphon system   Pressurized tank   
Inlet hole  Safety valve 0.6MPa     Outlet pipe  
One-way pressure discharge valve(0.48MPa)    60°C Warm water   Floor Drain


Unpressurized tank     Overflow pipe   Inlet pipe   Outlet pipe Vent (Must be open at anytime)   Overflow pipe   Basin/floor drain


 Tap Water   Hot water    1: Cold water valve   2: Water mixing valve

Bringing SEIDO solar collector and water storage tank together, the heat pipesolar water heater is an ideal solution to supply hotwater for private households (Sanitary Domestic Hot Water- SDHW). Owingto its features of environmental protection, high reliability as well asaffordable price, such water heating system has been widely accepted all overthe world, including China, Italy, Greece, Spain,Africa, etc. Furthermore, it is long-lasting, aesthetically pleasing and easyto use and maintain. It can create high customer value while operating economically.

The solar collector used by the solar water heater iscomposed of SEIDO heat pipe vacuum tubes which are made of borosilicate glasswith a thickness of 2.8 mm, an outer diameter of 100 mm and a length of 2000mm. The aluminum absorber inside comes with an Al-N-Oselective coating with the absorptance more than 0.94 and  emittance  less than 0.06. The air pressure inside the glass tubes is lessthan 0,001 Pa. With the high efficiency, the heat pipe can well transport theheat even with low solar irradiation and during winter. As the aluminum reflector integrated with the support frame whichis made of plastic coated angle steel, this solar water heater not only has apleasing appearance but also the features of built-in safety, durability and aneasy installation. In addition, its reflective surface is made of polished aluminum to well keep the characteristics of reflection not degraded by the dust and aging.

美工注意,此处放置图 2,以下文字替换图片2上的文字:
Pressurized tank
Unpressurized tank
1: Outside cover
2: Insulation: direct-injected polyurethane foam with 50mm thickness.
3: Drain hole
4: Cold water inlet
5: Against water mixing equipment
6: SEIDO heat pipe vacuum tube
7: Copper thimble tube
8: Inner tank: enamel inner tank with high quality 2.0mm thickness steel
9: Warm water outlet
10: Electric heater boiler: water-electrical isolated heater.
11: Magnesium anode
12: TP valve
13: Airflow pipe
14: Overflow pipe
15: Side cover: EPDM

The side cover of the tank of the solar water heater is made of EPDM withadditive to resist against ultraviolet irradiation and ageing. Furthermore, thetank cover adopts the colored  steel  for beautifuland elegant design. The inside of the 2mm alloy steel tank is coated with thequartz enamel to resist corrosion. Manufactured of high strength material, thetank can bear the 6 bar working pressure.

The tank is fabricated using the gas protection welding technology, a patentedsealing technology, to avoid leakage problems during the operation of the solarwater heater. There is also a unique and non-corroding protection tube betweencondenser and water without impact on the heat transfer and a magnesium bar as the sacrificial anode to protect the enamel inner tank. Furthermore, expanded polyurethane insulation realizesperfect insulation, rigidity and tightness. It is injected in liquid form andexpands after being injected. Additionally, the design of the tank makes thehot water and cold water separated from each other.

Features of Flat Plate PressurizedType  
1. The working medium flows inside the metal passageway, the copper tube,thus the flat plate solar water heater can work with high pressure, unaffectedby the corrosion and free from water leakage.
2. Well tempered, the glass this product adopts has high strength,so it is hard to be broken. If broken, thetempered glass will hardly hurt people.
3. This water heating system can protect itself from overheat to ensure stableand safe operation. If the temperature of the water in the system is too high,the solar collector will dissipate the heat at a fast speed, thus thetemperature is hard to rise and the pressure of system is prevented from increase.Hence, the system is well protected and the workingmedium is kept from decrease and evaporation.
4. Made of no fast-wearing parts, this flat plate solar water heater featureshigh reliability. As the glass has no contact with the water, it cannot bebroken by the temperature stress. Also, it is strong enough to resist cold orheat impact as well as the hail strike. Thus, it comes with zero maintenance.
5. This solar water heating system is long-lasting with the design life over 25years and working life up to 30 years.
6. Having large effective aperture area, it has high heat collecting efficiencywith the transient efficiency intercept over 80%. So it can absorb a lot ofheat.
7. Employing the high purity copper tube, the flat plate water heating systemis corrosion resistant and hard to create aerugo. Owing to the closed double circulationsystem, it produces no pollution and provides high quality water which can bedrunk directly.
8. Indirectly heated, it is freeze-proofing. It can be used in alpine regionsor in winter.
9. It is easy to install and carry.
10. The hot water comes out from the top of the solar water heater. Moreover,the standing water tank can be installed in the balcony or the bathroom. Thereis little cold water in it. As soon as this water heating system is switchedon, the hot water will come out. Thus, it is easy and comfortable to use.Meanwhile, it is also water saving.
11. Since the hot water comes out from the top, the hot water and tap water canexchange with each other. No matter how the tap water pressure fluctuates, thepressure of hot water and that of cold water are the same all the time. Afterbeing adjusted by the mixing valve, the temperature stays relatively stable.

Features of SplitPressurized Type
1. With the solar collector separated from the hotwater storage tank, this split solar water heater is suitable for variousapplication requirements.
2. It is easy and convenient to use. The water is pollution-free, so this waterheating system is highly safe and reliable for you to use. Furthermore, it ishard to be blasted and scaled as well as free of water leakage problem. The hotwater is ready to use as long as you turn on the system.
3. The hot water storage tank has a capacity of 200L or 300L, meeting therequirements for large water supply.
4. The cover plate and vacuum tube of the solar water heater are made ofinternationally advanced low-iron glass with the light transmittance increasedby over 10%. Furthermore, the high performance selective coating furtheroptimizes the solar absorptance and heat emittance. Thethickened thermal insulation layer reduces the heat loss coefficient.
5. The pressurized design provides users with comfortable shower experience.
6. This solar water heater adopts the double loop design. The primary loop usesthe antifreeze medium which makes this system stably and safely under lowtemperatures.
7. The circulation control system used by this product is imported from Italy, whichimproves the durability and stability of the product.
8. The use of safety valve and decompression valve highly improves the safetyof this water heating system. In addition, the temperature protection devicewith high safety is selected as the electrical auxiliary heating equipment. Ifthe sunlight is not good enough, then the electrical auxiliary heating functioncan be started up to supply you hot water throughout the whole day.

Solar Water Heater

























Related Names
Solar Power Heating Equipment | Solar Energy Boiler | Solar Heat Booster | Solar Energy Water Warmer








Recommended Products
Hot Products