SEIDO1 Heat Pipe Solar Collector
Technical Specifications
Model type | SEIDO1-8 | SEIDO1-8AS | SEIDO1-16 | SEIDO1-16AS | |
美工注意放置图1 | 美工注意放置图2 | 美工注意放置图3 | 美工注意放置图4 | ||
Header box | Material | Aluminum | Aluminum alloy | Aluminum | Aluminum alloy |
Color | Brown | Silver | Brown | Silver | |
Diameter | Φ100mm | Φ130mm | Φ100mm | Φ130mm | |
Insulation | Polyurethane | ||||
Tube | Type | SEIDO1 heat pipe evacuated tube (flat absorber) | |||
Dimension | Φ100×2000mm | ||||
Quantity | 8 | 16 | |||
Support | Material | Stainless Steel | |||
Type | Two side supports and one bottom support with clips | ||||
Length × width ×height (mm) | 2126×960×175 | 2141x980x187 | 2126×1920×175 | 2141x1940x187 | |
Aperture area(m2) | 1.51 | 3.01 | |||
Absorber area (m2) | 1.4 | 2.8 | |||
Gross area (m2) | 2.04 | 2.10 | 4.08 | 4.15 | |
Weight (kg) | 50 | 100 | |||
Fluid capacity per module | 0.48L | 0.96L | |||
Pressure dropper module | 5mbar (100L/h) | 12mbar (200L/h) | |||
Max. operating pressure | 6 bar | ||||
Stagnation temperature (module) | 190oC | ||||
Angle of inclination | 15~90o | ||||
Connection | 22mm compression fitting |
The SEIDO1 heatpipe solar collector we supply here is available in SEIDO1-8, SEIDO1-8AS, SEIDO1-16 and SEIDO1-16AS models.As an indispensable device in the solar water heating system, it isable to collect together the solar energy scattering here and there. Thisproduct features stable performance and optimal construction. Furthermore,it is convenient to install and use while hardly needs maintenance.
The vacuum tubes of the heat pipe solar collector areconnected together with the header box and supported with the stainless steelbracket. In addition, the header box varies from models to models.Specifically, for SEIDO1-8 and SEIDO1-16 models, the header box is made ofaluminum with a brown surface and its diameter is 100mm while for the SEIDO1-8AS and SEIDO1-16AS models, the header box is manufactured of aluminumalloy with a silvery white surface and its diameter is up to 130mm.