Heat Pipe Solar Vacuum Tube

Send Message Request a Quote

Heat Pipe Solar Vacuum Tube

美工注意，此处放置图片1

Technical Specifications

Type	SEIDO1
Specification	Heat pipe evacuated tube with flat absorber
Configuration	美工注意，此处放置图 2
Absorber area	0.173 m²
Weight	4.6 kg
Installation tilt angle	15° ~ 90°
Dimension	Ø100mm2000mm
Heat pipe	Heat pipe copper Ø8 mm
Absorber material	Copper- Aluminum Sunstrip, 0.47 mm thickness
Selective coating	Aluminum nitride Al-N-O selective coatingAbsorptance : a > 0.94Emittance : e < 0.06
Glass tube material	Borosilicate glassThickness: 2.8 mmTransmittance of glass: 91%
Vacuum	< 10-5 mbar
Min. ambient temperature	-45°C
Stagnation temperature	234.8°C
Resistance to hail	11J -1J

The SEIDO1 heat pipe solar vacuum tube is 2000mm long. Its diameter is 100mm and weight is 4.6 kg. With the installation tilt angle ranging from 15° to 90°, this product can be easily installed on the roofs with various sloping angles. Since adopting the flat plate absorber, it not only has a compact structure but also an aesthetically pleasing appearance. The heat pipe solar vacuum tube is ideally suited for the places which have strong solar irradiation at noon. Though it takes up little space, its absorber area is up to 0.173 m2. Therefore, it has strong ability to absorb the solar energy.

Related Names
Evacuated Tube Solar Collector | Solar Heat Hollow Pipe | Tubular Solar Heat Vacuum | Heat Pipes Solar Water-Heater

Scan QR to Read
Links：https://www.globefindpro.com/products/46297.html

Recommended Products