Flat Plate Solar Collector

Send Message Request a Quote

Flat Plate Solar Collector

The flat plate solar collector has gained great popularity in Europe and America, owing to its high cost effectiveness, long service life of more than 25 years and zero maintenance. Highly efficient, it can still work in the low temperatures and well resist against pressure. Furthermore, this product features high heat conductivity while low thermal inertia. It can be easily installed and integrated into the buildings. Additionally, it is an ideal choice for the areas in which the solar source is good and the freezing period is very short.

Technical Specifications

Model type		PG2.0-F/L	PG2.0-F/S		PG2.0-F/T
		美工注意，此处放置图1	图2		图3
Dimension L×W×H (mm)		2013×1013×82			2000×1000×80
Aperture Area (m²)		1.83m²			1.85m²
Gross Area (m²)		2.04m²			2m²
Gross Weight (kg)		42			34
Cover	material	Low iron tempered glass
	thickness	3.2mm
	transmittance	>0.91
Absorber	material	Copper-Aluminum Sunstrip, 138mm width			Full-plate absorber, 0.4mm Aluminum
	Surface treatment	Anodizing		Sputtering Al-N-O	Sputtering
	Absorptance	0.92		0.95±0.02	0.95±0.02
	Emittance	0.15		0.07±0.02	0.04±0.02
	Construction Type	Fin & Tube			Full-plate absorber & Tube
	Header tube	Φ22mm copper tube, 2pcs			Φ22mm copper tube, 2pcs
	Riser	Φ12mm copper tube, 7pcs			Φ10mm copper tube, 8pcs
Frame	Material	Aluminum Alloy
	Color	Silver
Insulation	Material	Fiber Glass			Glass wool
	Density	Back: 45kg / m3, side: 64kg / m3			Back: 32kg / m3, Side:24kg /m3
	Thickness	Back: 30mm, Side: 25mm			Back: 30mm, Side: 28mm
Back plate		Galvanized plate, 0.5mm			Embossed aluminum sheet , 0.5mm
Max. operating temperature		130°C
Max. operating pressure		8 bar			9 bar
Sealing profile		EPDM
Connection		22mm compression fitting