PTZ Dome CCTV Camera
Description
The PTZ dome CCTV camera uses an RS485 communication line for control andprogramming. You can use any controller that is Pelco, Pelco-D/-P,or Ultrak compatible or useone of our DVRs or PTZcontrollers.
The PTZ dome CCTV camera offers continuous 360° rotation with no dead spots.This model's high speed pan/tilt motor gives it the ability to turn at speedsup to 400°/sec under manual control and 500°/sec on presets. It is ideal forlarge outdoor spaces and high traffic areas.
Technical Specifications of the PTZ DomeCCTV Camera
Model Number | JK-2851 | JK-2288 | JK-2213 | JK-2209 | JK-2210 |
Horizontal Angle | 0 ~ 360° infinite | ||||
Level Rotation | 0 ~ 240°/ second | 0 ~ 250°/ second | 0 ~ 250°/ second | 10°/ second | 0 ~ 250°/ second |
Up and Down Rotation | 0 ~ 120°/ second | 0 ~ 150°/ second | 0 ~ 150°/ second | 5°/ second | 0 ~ 150°/ second |
Communication | Multi-protocol communication using RS-485 Control | RS485/ Manchester / BI-PHASE code | Multi-protocol communication using RS-485 Control | Communication:RS-485 data communication | |
Working Temp | -40 ~ 60° | Working temperature: -20ºC ~55ºC | -40 ~ 60° | ||
Waterproof Grade | IP66 | ||||
Dimension | 7 inch | 9 inch | 7 inch | ||
Signal System | NTSC/PAL | ||||
Infrared | Low noise design | 100m | 80M | 100M | 100-120m |
ZOOM | 220X/270X/300X | ||||
Image Sensor | 1/4 Sony CCD | ||||
Horizontal Resolution | 480TVL | 540/480 TVL | |||
Supplied Voltage | 18-30VAC standard 24VAC | AC 24V 3A | AC24/3A (±10%) | AC 24V | AC 24V |
Model Number | JK-2208N | JK-2207 | JK-2206 |
Signal System | NTSC/PAL | ||
Supplied Voltage | AC 24V | ||
Power Consumption | 3A | ||
Infrared | Low noise design | Low noise design | Low noise design |
Horizontal Angle Up and Down Angle | 360° 90° | ||
Communication | Multi-protocol, RS485, Protocol: PELCO D, PELCO P, etc. | ||
ZOOM (Optional) | 220X/270X/300X | Optical 22X Digital Zoom: 10X | |
Image Sensor | 1/4inch Sony CCD | ||
Horizontal Resolution | 540/480 TVL | ||
Waterproof Grade | IP66 | ||
Size | 7 inch | 8 inch | 7 inch |
Working Temp | -40 ~ 60ºC |
Model Number | JK-2218 | JK-1815 | JK-2204ir |
Signal System | NTSC/PAL | ||
Supplied Voltage | AC 24V | ||
Power Consumption | 3A | 3-5A | |
Infrared | Low noise design | 80M | |
Horizontal Angle Up and Down Angle | 360° 90° | ||
Communication | Multi-protocol, RS485, Protocol: PELCO D, PELCO P, etc. | Multi-protocol, RS485,Protocol:PELCO D, PELCO P, etc Communication baud rate: optical | |
ZOOM (Optional) | 220X/270X/300X | ||
Image Sensor | 1/4inch Sony CCD | ||
Horizontal Resolution | 540/480 TVL | ||
Waterproof Grade | IP66 | no | IP66 |
Size | 7 inch | 5 inch | 7 inch |
Working Temp | -20ºC ~55ºC | -20 ~ 60ºC | -10 ~ 60ºC |
Technical Specifications of the CCTV Tester
Model Number | JDR-011C |
Video signal test | |
Video system | NTSC/PAL auto adaptation |
Video signal | 1Vpp |
Display screen | 2.8-inch digital, LCD color screen , resolution: 960 x 240 |
Video input / output | 1 channel Video IN BNC ( isolated input) , 1 channel Video OUT BNC ( drive output) |
Video signal strength measurement | |
Video signal measurement | Measure the level range of video signal, display the exception information |
PTZ control test | |
Communication interface | Support RS232/RS485 bus |
Communication protocol | Compatible with more than ten kinds of protocols, such as Pelco -D/P, Samsung, Panasonic, Lilin , Yaan , etc. |
Baud rate | 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps |
Color image generator | |
Video signal generator | Send color graphics video test signal via video OUT port |
UTP | |
Network cable testing | Test any two or more network cables and display the connection sequence and cable number on the screen |
Protocol code capture | |
capture | Receive and display RS485/RS232 protocol code data from the control equipment |
Power Supply | |
External power supply | DC 5V (2A) |
Battery power supply | Built-in 3.7V lithium polymer battery with a capacity of 2000mAh |
Charging | Charging time: 3-4 hours , available time after charging: 11 hours |
Power-saving function | low power consumption, automatic standby , the battery icon is real-time display |
System parameters | |
Operation setup | C/E keyboard , English OSD menu |
Background color | Black, white, green, blue (optional) |
Automatic standby | Off /5-60 minutes |
Keyboard sound | On / Off |
Working conditions and specifications | |
Operating temperature | -10 ℃ --- 50℃ |
Operating Humidity | 30%-90% |
As an experienced PTZ dome CCTV camera manufacturer and supplier basedin China,JMK offers a vast range of products that includes CCTV camera, IP securitycamera, quad splitter, car security camera, and much more.