Ballistic Fabric, UD Polyethylene Fabric
The ballistic fabric can be used to produce bulletproof helmets, ballistic shields, light armor plates, etc. Each layer of the fabric is composed of two layers of unidirectional fiber, cross each other at 90 °, and then based on the combination of special glue and technology, coming out the white fiber sheet.
| Type | Area Density | Thickness | Routine Size (Width x Length) | NIJ level IIIA (NIJ 0101.04) | NIJ level IIIA (NIJ 0101.06) | NIJ level IIIA (NIJ 0101.06) | NIJ level III (hard armor panel) |
| g/m2 | mm | m x m | 9mm Luger | .357 SIG | .44 Magnum | ||
| WB-674M | 160±8 | 0.18±0.02 | 1.2×100 | 26 layers | 32 layers | 34 layers | |
| HA-782 | 120±8 | 0.20±0.02 | 1.2×100 | 7.62x51mm M80 by M14: 20 kg/m2. 7.62x39mm MSC by AK47: 20 kg/m2. | |||
Scan QR to Read
Links：https://www.globefindpro.com/products/47895.html
Links：https://www.globefindpro.com/products/47895.html
Recommended Products
-
Pasgt PE Bulletproof Helmet TAT-BH-2
-
PG-Series Flat Glass Tempering System
-
Stab Proof Vest TAT-SPV-1
-
Pasgt PE Bulletproof Helmet TAT-BH-3
-
Level III Ballistic PE Plate BP-05, Body Armor Plate
-
L-Series Continuous Tempering System
-
Z-Series Longitudinal Bending and Tempering System
-
Level III Bulletproof Plate BP-06, Ceramic Armor Plate
-
PASGT Aramid Bulletproof Helmet, Ballistic Helmet
-
Automatic Control System
-
Stab Proof Vest TAT-SPV-2
-
Dyneema Bulletproof Helmet TAT-BH-6
Hot Products
