Hose
Hose
Our high pressure hose is used to transportwater, gas, oil and other high pressure mediums. It can operate at -40℃to 100℃. Thistype of hose adopts advanced nano material so that itfeatures great oil, ozone, aging resistance and high pulse performance. Our high pressure hoses includetwo types, which are enhanced steel wire braided hydraulic hose and enhanced steelwire spiral hydraulic hose.
Parameters of Enhanced Steel Wire BraidedHydraulic Hose
| Inner diameter (mm) | Type | OD of enhanced layer (mm) | OD of hose (mm) | Operating pressure (kgf/cm2) | Min bending radius (mm) | Weight (kg/m) | Length (M) | ||||
| Nominal size | Min | Max | Min | Max | Min | Max | |||||
| 5 | 4.5 | 5.4 | Ⅰ | 8.9 | 10.1 | 11.9 | 14.1 | 210 | 90 | 0.28 | 3～20 |
| Ⅱ | 11.6 | 11.7 | 13.6 | 15.7 | 370 | 0.42 | |||||
| Ⅲ | 12.4 | 13.5 | 15.4 | 17.5 | 450 | 0.60 | |||||
| 6.3 | 6.1 | 6.9 | Ⅰ | 10.6 | 11.7 | 13.6 | 15.7 | 200 | 100 | 0.31 | 3～20 |
| Ⅱ | 12.1 | 13.3 | 15.1 | 17.3 | 350 | 0.50 | |||||
| Ⅲ | 13.9 | 15.1 | 16.9 | 19.1 | 400 | 0.70 | |||||
| 8 | 7.7 | 8.5 | Ⅰ | 12.1 | 13.3 | 15.1 | 17.3 | 175 | 115 | 0.34 | 5～20 |
| Ⅱ | 13.7 | 14.9 | 16.7 | 18.9 | 300 | 0.53 | |||||
| Ⅲ | 15.5 | 16.7 | 18.5 | 20.7 | 330 | 0.74 | |||||
| 10 | 9.3 | 10.1 | Ⅰ | 14.5 | 15.7 | 17.5 | 19.7 | 160 | 130 | 0.42 | 5～20 |
| Ⅱ | 16.1 | 17.3 | 19.1 | 21.3 | 280 | 0.67 | |||||
| Ⅲ | 17.9 | 19.1 | 20.9 | 23.1 | 310 | 0.92 | |||||
| 12.5 | 12.3 | 13.5 | Ⅰ | 17.5 | 19.1 | 20.5 | 23.1 | 140 | 180 | 0.55 | 5～20 |
| Ⅱ | 19.1 | 20.7 | 22.1 | 24.7 | 250 | 0.85 | |||||
| Ⅲ | 20.9 | 22.5 | 23.9 | 26.5 | 270 | 1.16 | |||||
| 16 | 15.4 | 16.7 | Ⅰ | 20.6 | 22.2 | 23.6 | 26.2 | 105 | 205 | 0.65 | 5～20 |
| Ⅱ | 22.2 | 23.8 | 25.2 | 27.8 | 200 | 1.00 | |||||
| Ⅲ | 24 | 25.6 | 27 | 29.6 | 220 | 1.38 | |||||
| 19 | 18.6 | 19.8 | Ⅰ | 24.6 | 26.2 | 27.6 | 30.2 | 90 | 240 | 0.72 | 5～20 |
| Ⅱ | 26.2 | 27.8 | 29.2 | 31.8 | 160 | 1.10 | |||||
| Ⅲ | 28 | 29.6 | 31.0 | 33.6 | 180 | 1.50 | |||||
| 22 | 21.8 | 23.0 | Ⅰ | 27.8 | 29.4 | 30.8 | 33.4 | 80 | 280 | 0.82 | 5～20 |
| Ⅱ | 29.4 | 31.0 | 32.4 | 35.0 | 140 | 1.26 | |||||
| Ⅲ | 31.2 | 32.8 | 31.2 | 36.8 | 160 | 1.71 | |||||
| 25 | 25.0 | 26.4 | Ⅰ | 31.2 | 33.0 | 35.2 | 38.0 | 70 | 300 | 1.01 | 5-20 |
| Ⅱ | 33.0 | 34.8 | 37.0 | 39.8 | 130 | 1.47 | |||||
| Ⅲ | 34.8 | 36.6 | 38.8 | 41.6 | 150 | 1.92 | |||||
| 31.5 | 31.3 | 33.0 | Ⅰ | 37.7 | 39.7 | 41.7 | 44.7 | 44 | 420 | 1.34 | 5～20 |
| Ⅱ | 39.5 | 41.5 | 43.5 | 46.5 | 110 | 2.02 | |||||
| Ⅲ | 41.3 | 43.3 | 45.3 | 48.3 | 120 | 2.65 | |||||
| 38 | 37.7 | 39.3 | Ⅰ | 44.1 | 46.1 | 48.1 | 51.1 | 35 | 500 | 1.54 | 5～20 |
| Ⅱ | 45.9 | 47.9 | 49.9 | 52.9 | 90 | 2.31 | |||||
| 51 | 50.4 | 52.0 | Ⅰ | 57.0 | 59.0 | 61.0 | 64.0 | 26 | 630 | 2.21 | 5～20 |
| Ⅱ | 58.8 | 60.8 | 62.8 | 65.8 | 80 | 3.11 | |||||
Note:1. This high pressure hose is manufactured accordingto GB/T3683-92 standards.
2. The length of hose can becustomized according to your requirements.
Drill Hose
Our drill hose is a kind of high strengthhose that is widely applied in petroleum industry. It is made using the latest nano material and is applicable to oil based, water basedmud. The drill hose has achieved an internationally advanced level and meets APISpec 7K standards.
A-Level Drill Hose
Applications
Wellcementation, well repair, borehole operation
Structure
Innerlayer: nano- nitrile rubber
Enhancedlayer: 2 layer high-strength steel wire
Mediumlayer: nano- butadiene styrene rubber
Outerlayer: nano- chloroprene rubber
Operating Temperature
-40℃ to 100℃
Standards
APISpec 7K SY5469 ISO6807
Parameters of Drill Hose
| Inner diameter | Outer diameter | Operating pressure | Test pressure | Min. radius of bending | Weight | Joint thread | ||||||
| mm | in | mm | in | MPa | psi | MPa | psi | mm | in | Kg/m | Ib/m | |
| 38 | 11/2 | 50.5 | 1.988 | 11 | 1600 | 22 | 3200 | 560 | 22.05 | 1.91 | 4.21 | 23/8TBG、API |
| 51 | 2 | 67.8 | 2.670 | 11 | 1600 | 22 | 3200 | 900 | 35.43 | 3.01 | 6.64 | 23/8TBG、API |
| 63.5 | 21/2 | 81.2 | 3.197 | 11 | 1600 | 22 | 3200 | 1200 | 47.24 | 4.12 | 9.08 | 27/8TBG、API |
Dezhou Rundong is aChina-based hose manufacturer. Our primary products include cementing tool,valve, manifold, and more. All aforementioned products feature durability andstable performance, and are CE certified. Due to our location in Dezhou city, China, we have easy access to lowlabor, material, and land costs. This is why we can provide high quality productsat low prices. If you are interested in our products, please contact usdirectly. We look forward to working with you.
Links：https://www.globefindpro.com/products/48538.html
