Butt Welding Machine

Butt welding machine are specially developed for wheel rim production lines to carry out welding operations after the weld joint has been flattened. The AC flash butt welder is comprised of the flashing welder, electrical system and hydraulic system. Workpiece clamping, welding, and weld slag removal are all hydraulically driven, and the welding parameters are easily set on the touch screen.

Features After flashing, upsetting is achieved using a hydro cylinder or servo motor pulse feeding according to customer requirements. The welding clamp is equipped with a weld slag scraper in the jaw to automatically remove weld slag, making it easy to use. The multi-stage adjustable welding current caters to welding of different wheel rim sizes. This butt welder uses high quality cooper electrodes, features an outstanding electric conductivity, a high welding quality and a rejection rate of less than 0.5%. The hydraulic system features a compact structure, ensuring it has a small footprint in your factory. The use of a dirt resistant hydraulic pump and servo valve ensure an excellent resistance to pollution and low dust treatment requirements, thus guaranteeing a low investment cost. Both manual and automatic operation modes are supported, making the butt welder easy to use. This welder features an overall framework design, allowing for a high strength, extremely precise welding operation. An automatic weld slag conveyor is an optional piece of auxiliary equipment used to automatically remove weld slags from the bottom of the welder. Technical parameters

No	Main Parameters	UN-630	UN-800	UN-1000	UN-1600
1	Main circuit rated input voltage	AC 380V/ 1Phase	AC 380V/ 1Phase	AC 380V/ 1Phase	AC 380V/ 1Phase
2	Control circuit rated input voltage	AC 380V/ 3Phase/50HZ	AC 380V/3Phase/50HZ	AC 380V/ 3Phase/50HZ	AC 380V/ 3Phase/50HZ
3	Secondary voltage	6.55V-11.8V	8.8V-14.6V	8.8V-14.6V	8.8V-19.6V
4	Solenoid valve voltage	DC 24V	DC 24V	DC 24V	DC 24V
5	Total power input	630kVA	825kVA	1050kVA	1610kVA
6	Rated power at 50% transformer utilization	600kVA	800kVA	1000kVA	1600kVA
7	Max. upsetting force	280kN	320kN	320kN	400kN
8	Max. clamping force	650kN	650kN	650kN	650kN
9	Max. welding cross section area	3200mm²	3500mm²	4000mm²	6000mm²
10	Max. rim band width	350mm	410mm	500mm	800mm
11	Max. rim band thickness	4.5mm	8mm	10mm	13mm
12	Min. welded rim diameter	250mm	400mm	400mm	500mm
13	Cooling water flow rate	4500L/H	4500L/H	5000L/H	6000L/H
14	Cooling water temperature	≤20℃	≤20℃	≤20℃	≤20℃
15	Cooling water pressure	0.2~0.4MPA	0.2~0.4MPA	0.2~0.4MPA	0.2~0.4MPA
16	Rejection rate	≤0.5%	≤0.5%	≤0.5%	≤0.5%

All parameters for this equipment are subject to change without notice and are provided only as reference. Customization services are available, and the final equipment will be supplied based on final technical agreements between us and the customer.