Bell Kiln, CY-8D

Send Message Request a Quote

CY-8D bell kiln is used in the sintering process of Mn-Zn soft ferrite. It differentiates from other sintering equipment for flexible operation, high control accuracy, lightweight structure, uniform atmosphere, and superb product quality.

Changyuan is an expert Chinese sintering furnace provider with 15 years' experience. We specialize in offering users comprehensive and custom metal powder sintering solutions and magnet manufacturing solutions.

Technical Parameters

No.	Item	Parameters
1	Space required	7000 ×5500 ×5600 (L×W×H) mm (including operation platform)
2	Rail length	12m
3	Kiln car quantity	2 (standard configuration)
4	Furnace dimension	2620 ×1300 ×1260 (L ×W ×H) mm
5	Product size	(L400 ×W400 ×H1150) mm ×8 stacks
6	Capacity	1200kg/furnace
7	Power consumption	2600Kw·h/furnace (standard state)
8	Gas consumption	gaseous nitrogen150 m3/furnace (standard state)
9	Water consumption	roughly 10t/furnace
10	Temperature uniformity	no more than 5 ℃ of difference, tested by PTCR ring
11	Atmosphere uniformity	fully mixed
12	Max heating power	350Kw
13	Temperature controller	50 sets parameters
14	Heating rate	250 ℃/h (max)
15	Cooling rate	over 600 ℃: 5 ℃/min (max); less than 600 ℃: 2~3 ℃/min
16	Heating unit quantity	35 silicon carbide rods divided into 15 groups
17	Heating unit specification	φ40 silicon carbide rods with the same diameter; total length: 1800mm; length of heating end: 1000mm