Carbide Rod (with Two 30º/40° Helical Coolant Holes)

Send Message Request a Quote

Customized Carbide Round Rod, Tungsten Carbide Cutting Tools, Solid Carbide Tools, Carbide End Mill

CY CARBIDE is able to customize carbide rods with two 30°/40° helical coolant holes precisely according to what clients have required. What you need is just to offer your specific requirements or drawings.

Carbide Rod (with Two 30º/40° Helical Coolant Holes)

Two 30° Twisted Coolant Ducts Carbide Rods
Specification
Two 30° Twisted Coolant Ducts Rods Type 2H-30°

Unground		Ground h6	L Tol. 5.0	TK	Tol.	d	Tol.	Pitch
D	Tol.	Ground h6	L Tol. 5.0	TK	Tol.	d	Tol.	Pitch
6.3	0.4 / 1.0	6.0	330	2.7	± 0.2	0.80	± 0.15	32.65
7.3		7.0	330	3.5		1.00		38.09
8.3		8.0	330	3.4		1.00		43.53
9.3		9.0	330	4.5	± 0.3	1.40		48.97
10.3		10.0	330	4.8	± 0.3	1.30		54.41
11.3		11.0	330	4.9	± 0.4	1.40		59.86
12.3	0.4 / 1.2	12.0	330	6.3		1.70		65.3
13.3		13.0	330	6.1		1.75	± 0.20	70.74
14.3		14.0	330	6.7		1.80		76.18
15.3	0.4 / 1.4	15.0	330	7.3		1.75		81.62
16.3		16.0	330	8		2.00		87.06
17.3		17.0	330	8.5		1.75	± 0.25	92.5
18.3		18.0	330	9		2.30		97.95
19.3		19.0	330	9.7		2.00		103.39
20.3		20.0	330	10	± 0.5	2.50		108.83

40°Two Helical Coolant Ducts Tungsten Rod (Type 2H-40°)
Specification

Unground		Ground h6	L Tol. 5.0	TK	Tol.	d	Tol.	Pitch
D	Tol.	Ground h6	L Tol. 5.0	TK	Tol.	d	Tol.	Pitch
6.3	0.4 / 1.0	6.0	330	2.0	± 0.2	0.5	± 0.15	22.46
8.3		8.0	330	2.4	± 0.2	0.7		29.95
10.3		10.0	330	3.2	± 0.3	1.0		37.44
12.3	0.4 / 1.2	12.0	330	3.8	± 0.4	1.2	± 0.20	44.92
14.3	0.4 / 1.2	14.0	330	4.3		1.2		52.41
16.3	0.4 / 1.4	16.0	330	5.1		1.3		59.90
18.3		18.0	330	5.9		1.4	± 0.25	67.39
20.3		20.0	330	6.6	± 0.5	1.5	± 0.25	74.88