Extrusion Press (for Φ195mm Rod)

Φ195mm Copper Rod Extruder, Extrusion Machine, Brass Rod Extrusion Press

This extruder is a type of indirect extrusion machine. In indirect extrusion machine, the die is installed on the end of the hollow ram. When working, push forward the raw, extruded profile will come out from the bore of the ram.

Attractive Features of Brass Rod Extrusion Press
1. Indirect extrusion generates less heat and needs less power as there is no relative movement at the container wall.
2. In indirect extrusion press, 25%-30% less extrusion force is required.
3. The extrusion press for copper rod is appropriate for use in profiles with a small cross sectional area, under low temperature, at high speed.
4. Copper products processed by the extrusion equipment enjoy premium mechanical capacity, thanks to the uniform flow, small extrusion hole and low residual pressure ensured by the rod extruder.

Applications
Featured by superior quality and long lasting performance, copper parts produced by the extruder are ideal for use in solar system, electricity generation, switch gear and so forth.

Notes
1. Limited by the hollow raw, the applied load cannot exceed a certain range.
2. Limited by the size of die, profiles with complex cross section cannot be processed.