HS270 - Brass Compression Fittings for USA

Pipe fittings for use with copper tubing, aluminum tubing and plastic tubing

The brass compression fittings are ideal for use with copper, brass, aluminum, or plastic tubing and are commonly used on gasoline, grease, oil, water, vacuum, and air lines. The fittings are not recommended for use with steel tube.

Features Working Temperature: -65°F to 250°F Working Pressure: Temperature and type of tubing must be considered for proper fitting selection. The following is based on 70°F with copper tube. Installation Instruction

Cut tube square on the end. Start tubing on the insert and slide into the fitting until it hits the stop. Wrench tightens approximately 1 1/2 to 2 turns beyond hand tight. Do not over tighten.

Structure Brass Compression Union Brass Compression Elbow Brass Compression Tee Brass Compression Union Compression Union, HS270-001

Size
1/8“	1/2“
3/16“	5/8“
1/4“	3/4“
5/16“	7/8“
3/8“

Compression Reducing Union, HS270-002

Size
1/4“×1/8“	5/8“×3/8“
1/4“×3/16“	5/8“×1/2“
3/8“×1/4“
5/16“×1/4“
1/2“×3/8“

Compression Female Connector, HS270-003

Size
1/8“×1/8"F	1/4“×1/2"F	3/8“×3/8"F
3/16“×1/8"F	5/16“×1/8"F	3/8“×1/2"F
3/16“×1/4"F	5/16“×1/4"F	3/8“×3/4"F
1/4“×1/8"F	5/16“×3/8"F	1/2“×1/4"F
1/4“×1/4"F	3/8“×1/8"F	1/2“×3/8"F
1/4“×3/8"F	3/8“×1/4"F	1/2“×1/2"F
3/4“×1/2"F	5/8“×3/8"F	1/2“×3/4"F
3/4“×3/4"F	5/8“×1/2"F	7/8“×1/2"F
	5/8“×3/4"F	7/8“×3/4"F

Compression Male Connector, HS270-004

Size
1/8“×1/8"M	1/4“×1/2"M	3/8“×3/8"M
3/16“×1/8"M	5/16“×1/8"M	3/8“×1/2"M
3/16“×1/4"M	5/16“×1/4"M	3/8“×3/4"M
1/4“×1/8"M	5/16“×3/8"M	1/2“×1/4"M
1/4“×1/4"M	3/8“×1/8"M	1/2“×3/8"M
1/4“×3/8"M	3/8“×1/4"M	1/2“×1/2"M
1/2“×3/4"M	3/4“×1/2"M	7/8“×1/2"M
5/8“×3/8"M	3/4“×3/4"M	7/8“×3/4"M
5/8“×1/2"M	5/8“×3/4"M

Brass Compression Elbow Compression Equal Elbow, HS270-005

Size
1/8“	1/2“
3/16“	5/8“
1/4“	3/4“
5/16“	7/8“
3/8“

Compression Female Elbow, HS270-006

Size
1/8“×1/8"F	1/4“×1/2"F	3/8“×3/8"F	5/8“×3/8"F
3/16“×1/8"F	5/16“×1/8"F	3/8“×1/2"F	5/8“×1/2"F
3/16“×1/4"F	5/16“×1/4"F	1/2“×1/4"F	5/8“×3/4"F
1/4“×1/8"F	5/16“×3/8"F	1/2“×3/8"F	3/4“×1/2"F
1/4“×1/4"F	3/8“×1/8"F	1/2“×1/2"F	3/4“×3/4"F
1/4“×3/8"F	3/8“×1/4"F	1/2“×3/4"F	7/8“×3/4"F

Compression Male Elbow, HS270-007

Size
1/8“×1/8"M	1/4“×1/2"M	3/8“×3/8"M	5/8“×3/8"M
3/16“×1/8"M	5/16“×1/8"M	3/8“×1/2"M	5/8“×1/2"M
3/16“×1/4"M	5/16“×1/4"M	1/2“×1/4"M	5/8“×3/4"M
1/4“×1/8"M	5/16“×3/8"M	1/2“×3/8"M	3/4“×1/2"M
1/4“×1/4"M	3/8“×1/8"M	1/2“×1/2"M	3/4“×3/4"M
1/4“×3/8"M	3/8“×1/4"M	1/2“×3/4"M	7/8“×3/4"M

Brass Compression Tee Compression 3-End Tee, HS270-008

Size
1/8“	1/2“
3/16“	5/8“
1/4“	3/4“
5/16“	7/8“
3/8“

Compression Male Tee, HS270-009

Size

1/4“×1/4“×1/4“M

3/8“×3/8“×1/4“M

3/8“×3/8“×3/8“M

1/2“×1/2“×3/8“M

1/2“×1/2“×1/2“M

Tags brass quick connector
tube union tee