HS280 - Brass Compression Fittings with Brass Insert for USA

Pipe fittings for use with copper tubing, aluminum tubing and plastic tubing

Brass compression fittings with brass insert are ideal for use with copper, brass, aluminum, or plastic tubing and are commonly used on gasoline, grease, oil, water, vacuum, and air lines. The fittings are not recommended for use with steel tube.

Features Working temperature: -65°F to 250°F Working pressure: Temperature and type of tubing must be considered for proper fitting selection. The following is based on 70°F with copper tube. Installation Instruction

Cut tube square on the end. Start tubing on the insert and slide into the fitting until it hits the stop. Wrench tightens approximately 1 1/2 to 2 turns beyond hand tight. Do not over tighten.

Structure Union with Brass Insert Elbow with Brass Insert Tee with Brass Insert Brass Compression Union with Brass Insert Straight Union with Brass Insert, HS280-001

Size
1/8“	1/2“
3/16“	5/8“
1/4“	3/4“
5/16“	7/8“
3/8“

Reducing Union with Brass Insert, HS280-002

Size
5/16“×1/4“	5/8“×1/2“
3/8“×1/4“	7/8“×5/8“
1/2“×1/4“
1/2“×3/8“
5/8“×3/8“

Female Connector with Brass Insert, HS280-003

Size
1/4“×1/8"F	3/8“×3/8"F	7/8“×3/4"F
1/4“×1/4"F	3/8“×1/2"F
1/4“×3/8"F	1/2“×3/8"F
1/4“×1/2"F	1/2“×1/2"F
5/16“×1/4"F	5/8“×1/2"F
3/8“×1/4"F	5/8“×3/4"F

Male Connector with Brass Insert, HS280-004

Size
1/8“×1/8"M	5/16“×1/8"M	3/8“×3/4"M	5/8“×3/4"M
3/16“×1/8"M	5/16“×1/4"M	1/2“×3/8"M	3/4“×1/2"M
1/4“×1/8"M	3/8“×1/8"M	1/2“×1/2"M	3/4“×3/4"M
1/4“×1/4"M	3/8“×1/4"M	1/2“×3/4"M	7/8“×1/2"M
1/4“×3/8"M	3/8“×3/8"M	5/8“×3/8"M	7/8“×3/4"M
1/4“×1/2"M	3/8“×1/2"M	5/8“×1/2"M

Brass Compression Elbow with Brass Insert Compression Equal Elbow with Brass Insert, HS280-005

Size
1/4“	7/8“
3/8“
1/2“
5/8“
3/4“

Compression Male Elbow with Brass Insert, HS280-006

Size
1/4“×1/8"M	1/2“×1/2"M
1/4“×1/4"M	5/8“×3/8"M
3/8“×1/4"M	5/8“×1/2"M
3/8“×3/8"M
3/8“×1/2"M
1/2“×3/8"M

Brass Compression Tee with Brass Insert Compression 3-End Tee with Brass Insert, HS280-007

Size
1/4“	7/8“
3/8“
1/2“
5/8“
3/4“

Compression 3-End Reducing Tee with Brass Insert, HS280-008

Size

3/8“×3/8“×1/4“M

7/8“×7/8“×5/8“M