A Series Heat Pipe Solar Collector

A Series Heat Pipe Solar Collector

The Aseries heat pipe solar collector is scientifically designed, and themultifunctional frame can be fixed at different angles, and the frame can beadjusted from both up and bottom sides. This product can be mounted on flatroof, inclined roof and vertical wall.

Technical Parameters

Our product has anewly designed head box with fashionable appearance. In addition, the head boxand frame are both made of 2.0mm aluminum alloy, and the insulation material is50mm rock wool. Three target tube is adopted and thecollector has 14mm/20mm/24mm header heat pipe. Furthermore, the manifoldconnection size is 3/4in, and the 0.6Mpa pressure is acceptable.

Working Principle
Heat pipe series solar collector is connected with existing heating supplydevice. The selectiveabsorb layer on the inner tube of A series heat pipe solar collector isdesigned to convert solar energy into heat energy, and the heat is transferredto heat pipe via aluminum fin. Then, the anti-freezing liquid in the heat pipewill evaporate into vapor and rises to the condenser. The heat transfercirculation is formed in this way and it will continuously heat the water aslong as the collector is heated by the sun.

，









，
Hot vapour rises to header
Hot pipe tip
Rock wool
Cork sealing plug
Copper heat pipe
Aluminum fin
Medium liquid
Cooled vapour liquefies and returns to the bottom ofpipe to repeat cycle

A series heat pipe solar collector is the key part ofa solar water heater, and it is used to absorb dispersive solar energy and thenconverts the solar energy into heat. It is a solar power panel with simplestructure and moderate cost, and it can bear high pressure. Furthermore, thecollector has big absorb area, and it is an ideal product combining solar energy andarchitectural building. Seven models of the solar collector are available, andthe specific parameters are different. The smallest absorb area is 0.87m2,and the collector only takes up a volume of 0.185m3. On the otherhand, the biggest absorb area among these collectors is 2.6m2, andthe volume is 0.423m3.