HS260 - Brass Flare Fittings

Pipe fittings for use with copper tubing, steel tubing and aluminum tubing

We offer a wide variety of brass flare fittings including standard 45°, inverted 45°, POL, gas range, and fine thread (9/16” x 24) for space heater applications.

Brass flare fittings are designed for higher pressure applications and are commonly used for gasoline, grease, oil, water, vacuum, air lines and natural gas. Flare fittings can also be used for refrigeration, air conditioning, and other applications involving hard to hold liquids and gases using forged nuts.

It is recommended for use with copper, brass, aluminum, and welded steel hydraulic tubing that can be flared and not recommended for use with polybutylene or soft plastic tubing.

Features Working Temperature: -65°F to 250°F Working Pressure: Temperature and type of tubing must be considered for proper fitting selection. The following is based on 70°F with copper tube. POL and Gas fittings have a maximum working pressure of 250psi. Structure Brass Flare Union Brass Flare Elbow Brass Flare Tee Brass Flare Union Flare to Flare Euqal Union, HS260-001

Size

1/4“

5/16“

3/8“

1/2“

5/8“

3/4“

7/8“

Flare to Flare Reducing Union, HS260-002

Size
3/8“×1/4“	3/4“×3/8“
1/2“×1/4“	3/4“×1/2“
1/2“×3/8“	3/4“×5/8“
5/8“×3/8“
5/8“×1/2“

Flare to Female Coupling, HS260-003

Size
1/4“×1/8"F	3/8“×3/8"F	5/8“×1/2"F
1/4“×1/4"F	3/8“×1/2"F	5/8“×3/4"F
1/4“×3/8"F	3/8“×3/4"F	3/4“×3/4"F
1/4“×1/2"F	1/2“×3/8"F	7/8“×3/4"F
5/16“×1/4"F	1/2“×1/2"F
3/8“×1/4"F	1/2“×3/4"F

Flare to Male Coupling, HS260-004

Size
1/4“×1/8"M	5/16“×1/4"M	3/8“×3/4"M	5/8“×1/2"M
1/4“×1/4"M	3/8“×1/8"M	1/2“×3/8"M	5/8“×3/4"M
1/4“×3/8"M	3/8“×1/4"M	1/2“×1/2"M	3/4“×3/4"M
1/4“×1/2"M	3/8“×3/8"M	1/2“×3/4"M	7/8“×3/4"M
5/16“×1/8"M	3/8“×1/2"M	5/8“×3/8"M

Flare Plug, HS260-009

Size

1/4“

5/16“

3/8“

1/2“

5/8“

3/4“

7/8“

Flare to Flare Swivel, HS260-010

Size

1/4“

3/8“

1/2“

5/8“

3/4“

Brass Flare Elbow Flare to Flare Elbow, HS260-005

Size

1/4“

5/16“

3/8“

1/2“

5/8“

3/4“

7/8“

Flare to Female Elbow, HS260-006

Size
1/4“×1/4"F	1/2“×3/4"F
1/4“×3/8"F	5/8“×1/2"F
3/8“×3/8"F	5/8“×3/4"F
3/8“×1/2"F	7/8“×3/4"F
1/2“×3/8"F
1/2“×1/2"F

Flare to Male Elbow, HS260-007

Size
1/4“×1/8"M	3/8“×1/2"M	7/8“×3/4"M
1/4“×1/4"M	1/2“×3/8"M
3/8“×1/8"M	1/2“×1/2"M
3/8“×1/4"M	5/8“×1/2"M
3/8“×3/8"M	5/8“×3/4"M

Brass Flare Tee Flare 3-End Tee and Reducing Tee, HS260-008

Size
1/4“	3/8“×3/8“×1/4“
3/8“	1/2“×1/2“×3/8“
1/2“	5/8“×5/8“×3/8“
5/8“	5/8“×5/8“×1/2“
3/4“

Tags street elbow