ZGS1-T Automatic Transfer Switches (ATS)

160A~400A
Poles: 2 P, 3P, 4P
Functions of Dual Power Automatic Transfer Switch PC-class(ZGS1-T):
Simultaneously detect two lines power supply of three-phase four-wire grid
It has several protection functions such as over-voltage, under-voltage and lack of phase and so on;
Split type of ATS, the line between the controller and the switch installed by the user and the wiring type is ZGS1-T;
Use a special-purpose connecting socket between split ATS and the switch entity then users only needs major loop connection and inserts the socket power supply and the type is ZGS1-C;
One pair of passive contact can transmit to start generator function.
Types and Functions of Controllers Used in Automatic Transfer Switch:
Introduction of ZCU-A -type Controller’s Functions:
-Indicate the current state of put- in circuit;
-Indicate the current on/off state of switch;
-Any path stops the power supply, its control switch automatically transform to another power supply to output to the load;
-Any path appear over-voltage, under-voltage, lack phase, its control switch automatically transform to another power supply to output;
-Two-path power supply at the same time, its control switch transform to the main power output(self-transfer and self-recovery), users can ask for self-transfer and self-recovery or stand-by precedence circuit;
-It is available to supply compulsive and adjustable delay within the range of 30 S;
-Two modes of operation: manual and automatic, hand regulation.