ZGS1-G Automatic Transfer Switches (ATS)

Rated current:16A~100A
Poles:3P, 4P
Characteristics of ZGS1-G Dual PowerAutomatic Transfer Switch:
ZGS1-G Automatic Transform Switch (ATS) combines switches and logic controltogether as a unity that needs no additional controllers and it is a reallyautomatic transfer switch of electromechanical integration. ZGS1-G automatictransform switch has functions of voltage detection, frequency test,communications interface, electrical and mechanical interlock and so on and itreally realize automatic, electric long-distance and emergency manual control.
Operation of this automatic transfer switch is achieved through controlling therun of TVs and gear boxes by the logic control panel in a variety of logicalorders. And the electrical motor can drive switch spring for storage, theinstantaneous released speeding up mechanism and rapid access breaking circuiteven or circuit transforming can all be safely isolated by clearly visiblestatus, greatly improving the performance of various electrical and mechanical properties.
ZGS1-G automatic transfer switch generally features its metal-made outer crust,smart but solid design. It applies glass fiber reinforced unsaturated, polyestermolding materials with a high dielectric properties, protection capabilitiesand reliable operational security.
ZGS1-G automatic transform switch is suitable for automatic transfer betweenmain and stand-by electrical sources of the power-supply system, the automatictransfer and safety isolation of two load equipments.
With the attractive exterior, novel but simple design, small size and thevarious functions, ZGS1-G automatic transform switch will be always an idealchoice of different occasions.
ZGS1-G automatic transform switch meets the following standards:

National Standards:
IEC60947-1(1998)/GB/T4048.1-2002 Low-voltage switchgear and control-gearGeneral Rules
IEC60947-3(1999)/GBI4048.3-2002 Low-voltage switchgear and control-gear,low-voltage switch, isolation, isolating switch and fuse combinations
IEC60947-6(1999)/GBI4048.11-2002 Low-voltage switchgear and control-gear--Part1:Multiple function equipment--Automatic transfer switching equipment

Usage of ZGS1-G Dual Power AutomaticTransfer Switch:
With the exchange of 50 Hz, rated voltage 380 V DC rated voltage 220 V, ratedcurrent 16 ~ 3200 A ,ZGS1-Gautomatic transform switch is mainly used for the conversion system of a masterand a backup power or two mutual backup powers in the motor or the distributionnetwork and the load conversion of electricity generating units. At the sametime it can be used for infrequently connection and lines of isolationpurposes.
The automatic transform switch is widely used in power transmission anddistribution systems and automation systems in fire fighting, hospitals, banks,high buildings such important places the power there can not allowed to bebroken.

Performances and Characteristics of ZGS1-GDual Power Automatic Transfer Switch:
-Adopting a dual compound contact, traversing institutions,micro-electrical-energy storage and micro-electronics control technology, tobasically achieve no electric arcing (no interrupter cover); -Adopting reliableelectrical and mechanical interlocking chain , the implementarycomponents applies the independent Load Isolating Switches which make the usagesafe and reliable;
-Adopting zero position technology, it could be forced to zero point, (and cutoff the two-way power) in the emergency situations to meet the needs of thefire interaction services;
-Implementary Load Isolating Switches transformationuses a single electromotor drive that makes it stable and reliable, with asmall impact and no noise;
-Current can pass through the operational driving motor only at the instant of implementary Load Isolating Switches conversion, no moreworking current to stabilize the work and make the energy-saving manifest, theswitch are equipped with a mechanic interlocking to ensure the normal andstand-by power supply reliable and non-interferential;
-Functions such as clear on/off instructions or padlocks etc. can achieve areliable isolation between power supply and load;
-High-security, and a high degree of automation, high-reliability and servicelife of 8000 or more times;
-Electromechanical integration design, the switching conversion thatfeatures  accuracy, flexibility and smooth. It adopts internationallyadvanced logic control technology with a high anti-jamming ability and noexternal interference;
-With a main power closed, backup power open, the main power open, a backuppower closed; and both two power open stability (I-0-II);
-Easy installation, control loop applies inserted terminals connection;
-Four operating functions: emergency manual operation, the electric remotecontrol operation, emergency disconnection of an automatic controlled state,automatic control operation.