PU2000 Home Energy Saver

Installation
Three wires come out of a non-metallic connector of the PU2000 home energy saver. This equipment can be installed as follows.
1. Use flex conduit and connector to feed the 3 wires (2 red and 1 green) to the panel and connect the 2 red wires to the electrical disconnect box and the green wire to the ground bar;
2. Connect the disconnect box to the electrical system.

-Before installation, make sure the power is off; after the unit is installed completely, turn the power on (through engage the disconnect box) and check to make sure light is on.
-If light is not on, check ground and disconnect box for secure connections
-This home energy saver will work in a single phase power system with the rated voltage of 220V and frequency of 50/60Hz.

Benefits
-Reduce electricity required by existing inductive loads
-Enhance capacity of existing electrical system
-Eliminate danger of harmful power surges on appliances and sensitive electronic equipment
-Reduces harmful effects caused by electrical noise in the electrical system

Features
-Electrical noise reduction
-Power factor optimization
-Eliminate power surges!
-Voltage regulation
-Reduce electrical bills up to 25% or more every month!
-Pay for itself in less than one year!
-30-day money back guarantee!
-Increases motor and appliance life!
-CE certified!
-Suitable for use in home and small business (office, shop, bank, etc.)

Specifications
Power: 20KW
Size: 16cm×16cm×12cm
Weight: 2.5kg

Caution
1. Do not open the energy saver, for there is risk of electric shock and there are no serviceable parts.
2. Disconnecting the ground conductor may impair the performance of this product.
3. It is NOT recommended to put any Switches or Fuses in line with the earth conductor.

Related Names
Electric Power Saver | Energy Conservation Device | Electricity Saving Device