Home 1000W-6000W Pure Sine Wave Inverter for Solar Power System

1000W-6000W Pure Sine Wave Inverter for Solar Power System

Description
Our 1000W-6000W pure sine wave inverter is designed with a transformer, a built-in charger, and a LCD display. It has UPS function.


Application
The 1000W-6000W pure sine wave inverter is widely used in the solar power systems which provide power to the ships, houses, and vehicles. It can also be applied together with the wind generator.


Features
1. Our power inverter produces pure sine wave output and the peak power is three times the rated power.
2. The voltage, load and battery information are shown on the LCD display in real time.
3. This power inverter with charger adopts 4-step progressive charging and the maximum charging current is 35A or 70A.
4. It can charge 7 types of battery.
5. The energy output from a generator is acceptable.
6. The power consumption is low and the power factor reaches 0.9.
7. Automatic transfer is established between line mode and battery mode.
8. Microprocessor control guarantees a high degree of reliability.
9. Bypass is initiated when no batteries are connected.
10. Remote control is supported.
11. Our pure sine wave inverter can work with inductive loads such as door motor, air conditioner, etc.
12. This solar power inverter provides protection against over load, over charging, low battery, and over temperature

1000W-6000W Pure Sine Wave Inverter for Solar Power System

Technical Specifications
Model LW1000 LW1500 LW2000 LW3000 LW4000 LW5000 LW6000
Nominal Power 1000W 1500W 2000W 3000W 4000W 5000W 6000W
AC Input
Phase & waveform Single phase & Pure Sine Wave
Voltage 120V AC/230V AC
Acceptable Voltage 194-243V AC/164-243V AC (wide mode)
Line Low Transfer 85V±4%/184 (154 wide mode±4%)
Line Low Return 95V±4%/194 (164 wide mode±4%)
Line High Transfer 135V±4%/253±4%
Line High Return 127V±4%/243±4%
Frequency 50Hz or 60Hz (auto sensing)
Line Low Transfer 47Hz for 50Hz, 57Hz for 60Hz
Line High Transfer 55Hz for 50Hz, 65Hz for 60Hz
Output
Phase & Waveform Single phase & Pure Sine Wave (bypass mode sync to input)
Voltage 120/220/230/240VAC (bypass mode sync to input)
Voltage Regulation ±10%rms (bypass mode sync to input)
Frequency 50Hz±0.3Hz (bypass mode sync to input)
Peak Power 3 times of rating power
Short Circuit Protection Yes, shutdown after 10ms
Power Factor 0.9-1.0
DC Input
Battery Voltage 12V/24V 12V/24V/48V 24V/48V
Minimum Start Voltage 10V for 12V, 20V for 24V, 40V for 48V
Low Battery Alarm 10.5V for 12V, 21V for 24V, 42V for 48V
Low Battery Transfer 10V for 12V, 20V for 24V, 40V for 48V
High Voltage Alarm 16V for 12V, 32V for 24V, 64V for 48V
Max. Charging Current 35A / 70A
Over Charge Voltage 15.7V for 12V, 31.4V for 24V, 62.8V for 48V
Transfer Efficiency
Line Mode >95%
Battery Mode >88%
Power Saver Available when the load is less than 25 Watts
Indicators
7-LED Display From the right to the left: LED1 line mode (green lighting), LED2 inverter mode (green lighting), LED3 charging mode (yellow lighting), LED4 Fully charged (green lighting), LED5 over heat shutdown (red lighting), LED6 Overloaded shutdown (red lighting), LED7 Saving Mode (green lighting)
3-LED Display Charging Mode (green lighting), inverter mode (green lighting), Alarm (red lighting)
Switch Selector Saving Mode turned on/off when the switch is toggled forwards/backwards, keeping it horizontal powers the inverter off
Audible Alarm Sounding when the heatsink's tem is over 105℃ and shutdown after 30 seconds.
Protections Against low battery, over charging, over temperature, over load
Communications RS-232/USB (custom-made)
Environment Conditions
Operating Environment 0-40℃ ,0-90% RH (non-condensing)
Audible Noise <60dB
Physical Properties
Net Weight (KG) 18 20 20 26 48 48 48
Dimensions, L×W×H(mm) 446×218×179 605×218×179

Our company is a professional 1000W-6000W pure sine wave inverter for solar power system manufacturer and supplier in China. We also offer AGM battery, 20-80KVA online UPS with LCD display, MPPT solar charge controller and more.


Recommended Products
Hot Products