1000W-6000W Pure Sine Wave Inverter

Send Message Request a Quote

Description
Our 1000W-6000W pure sine wave inverter is equipped with a charger, a transformer, and a LCD display. It is able to withstand 3 times the rated power and it sometimes functions as a UPS.

Application
The power inverter with charger is ideal for supporting ships, houses, vehicles, wind generators, and solar power systems. It can be widely used in places that lack city power.

Features
1. The voltage, load and battery information are shown on the LCD display in real time.
2. Our power inverter is compatible with inductive loads such as motor door, air conditioner, etc.
3. Producing pure sine wave output, this power inverter is available for sensitive load.
4. Our DC to AC converter automatically transfers between battery mode and line mode.
5. Four-step progressive charging is adopted and 7 types of battery can be selected.
6. The maximum charging current is 35A and 70A.
7. The power output from a generator is acceptable.
8. The peak power is three times the rated power.
9. High power factor 0.9 enables low power consumption.
10. Microprocessor control guarantees reliability and stability in performance.
11. The pure sine wave inverter provides protection against overload, over charge, low battery, and over temperature. It also can be remotely controlled.
12. Bypass is activated in the absence of a viable battery.

Technical Specifications

Model No.	LW1000	LW1500	LW2000	LW3000	LW4000	LW5000	LW6000
Nominal Power	1000W	1500W	2000W	3000W	4000W	5000W	6000W
AC Input
Phase & Waveform	Single phase & Pure Sine Wave
Voltage	120V AC/230V AC
Acceptable Voltage	194-243V AC/164-243V AC (wide mode)
Line Low Transfer	85V±4%/184 (154 wide mode±4%)
Line Low Return	95V±4%/194 (164 wide mode±4%)
Line High Transfer	135V±4%/253±4%
Line High Return	127V±4%/243±4%
Frequency	50Hz or 60Hz (auto-sensing)
Line Low Transfer	47Hz for 50Hz, 57Hz for 60Hz
Line high Transfer	55Hz for 50Hz, 65Hz for 60Hz
Output
Phase & Waveform	Single phase & Pure Sine Wave (bypass mode sync to input)
Voltage	120/220/230/240VAC (bypass mode sync to input)
Voltage Regulation	±10%rms (bypass mode sync to input)
Frequency	50Hz±0.3Hz (bypass mode sync to input)
Peak Power	3 times of rated power
Short Circuit Protection	Yes, shutdown after 10ms
Power Factor	0.9-1.0
DC Input
Battery Voltage	12V/24V	12V/24V/48V			24V/48V
Minimum Start Voltage	10V for 12V, 20V for 24V, 40V for 48V
Low Battery Alarm	10.5V for 12V, 21V for 24V, 42V for 48V
Low Battery Transfer	10V for 12V, 20V for 24V, 40V for 48V
High Voltage Alarm	16V for 12V, 32V for 24V, 64V for 48V
Max. Charging Current	35A /70A
Over Charge Voltage	15.7V for 12V, 31.4V for 24V, 62.8V for 48V
Transfer Efficiency
Line Mode	>95%
Battery Mode	>88%
Power Saver	Available when the load is less than 25 Watts
Indicators
7-LED Display	From the right to the left LED1 line mode (green lighting), LED2 inverter mode (green lighting), LED3 charging mode (yellow lighting), LED4 fully charged (green lighting), LED5 over heat shutdown (red lighting), LED6 Overloaded shutdown(red lighting), LED7 Saving Mode (green lighting)
3-LED Display	Charging mode (green lighting), inverter mode (green lighting), Alarm (red lighting)
Switch Selector	Saving Mode is on/off when toggled, keeping it horizontal powers the inverter off.
Audible Alarm	Sounding when the heatsink's temperature is over 105℃. Shutdown will commence after 30 seconds.
Protections	Low battery, over charging, over temperature, over load
Communications	RS-232/USB (custom-made)
Environment Conditions
Operating Environment	0-40℃ ,0-90% RH (non-condensing)
Audible Noise	<60dB
Physical Properties
Net Weight (KG)	18	20	20	26	48	48	48
Dimensions, L×W×H (mm)	446×218×179				605×218×179

As a professional 1000W-6000W pure sine wave inverter manufacturer and supplier in China, our company also provides gel battery, 10-400KVA online UPS with LCD display, UPS battery pack, and more.

Scan QR to Read
Links：https://www.globefindpro.com/products/62418.html