EMA10 4 Flute Corner Radius End Mill, Long Length

Special 4~6 flutes design provides small chip loads, higher metal removal rates and better surface finish on the workpieces Results in excellent performance when cutting prehardened steels up to HRc56 Used for machining molds & dies Fit for milling from roughing to finishing at one time, with reduced tool changing times Oerlikon Balzers coating and tool geometry provide outstanding cutting ability and wear resistance Application
Product Specifications

Coating	AITiN /TiALN /TiAISiNAITiSiN	HRC	HRC46/56
Helix Angle	35°/36°/37°	Shank	Cylindrical H6
Material	IMC™ UMG Carbide Rod	Tolerance on Cutting Diameter	0-0.030

Carbide End Mill, 4 Flutes, Corner Radius, Long Length（EMA10)

UNT EDP # Click to Order	Corner RadiusR	Mill Dia.D1	Shank Dia.D2	Flute LengthL1	O.A.L.L2	Flutes
EMA1004075	R0.5	4.0	4	11	75	4
EMA1004100	R0.5	4.0	4	11	100	4
EMA1006075	R0.5	6.0	6	16	75	4
EMA100605	R0.5	6.0	6	16	100	4
EMA100610	R1.0	6.0	6	16	100	4
EMA100615	R1.5	6.0	6	16	100	4
EMA100620	R2.0	6.0	6	16	100	4
EMA1008051	R0.5	8.0	8	20	75	4
EMA100805	R0.5	8.0	8	20	100	4
EMA100810	R1.0	8.0	8	20	100	4
EMA100815	R1.5	8.0	8	20	100	4
EMA100820	R2.0	8.0	8	20	100	4
EMA101005	R0.5	10.0	10	25	100	4
EMA101010	R1.0	10.0	10	25	100	4
EMA101015	R1.5	10.0	10	25	100	4
EMA101020	R2.0	10.0	10	25	100	4
EMA101030	R3.0	10.0	10	25	100	4
EMA101205	R0.5	12.0	12	30	100	4
EMA101210	R1.0	12.0	12	30	100	4
EMA101215	R1.5	12.0	12	30	100	4
EMA101220	R2.0	12.0	12	30	100	4
EMA101230	R3.0	12.0	12	30	100	4
EMA101605	R0.5	16.0	16	40	100	4
EMA101610	R1.0	16.0	16	40	100	4
EMA101615	R1.5	16.0	16	40	100	4
EMA101620	R2.0	16.0	16	40	100	4
EMA101630	R3.0	16.0	16	40	100	4

• End mills with non-standard sizes or specifications not listed above can be customized according to customer needs.