Highly Transparent Silicone Rubber for Molding

Applications

This transparent silicone rubber is suitable for molding of a variety of products such as sheaths, wallets, watchbands, jewelries, etc., it is typically suitable for products that have high requirements of transparency.

Features Rapid vulcanization;
Easy de-molding;
Good tear strength and resilience;
Suitable for both manual and mechanical edge finishing; Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, siloxane testing, etc.

Test

50% DBPMH (2,5-Dimethyl-2,5-di-(tert-butylperoxy) hexane), addition 1%, 175℃×5min×15Mpa

Technical Data Model: HT-8105AT
Appearance: Translucent Processability: 50-100 Hardness (Shore A): 6 Density (g/cm3): 1.12 Tensile strength (Mpa): 5 Elongation (%): 700 Tear strength (K N/m): 8 Model: HT-8110AT
Appearance: Translucent Processability: 80-120 Hardness (Shore A): 10 Density (g/cm3): 1.13 Tensile strength (Mpa): 6 Elongation (%): 750 Tear strength (K N/m): 12 Model: HT-8120AT
Appearance: Translucent Processability: 120-150 Hardness (Shore A): 20 Density (g/cm3): 1.14 Tensile strength (Mpa): 7 Elongation (%): 650 Tear strength (K N/m): 15 Model: HT-8130AT
Appearance: Translucent Processability: 50-100 Hardness (Shore A): 6 Density (g/cm3): 1.12 Tensile strength (Mpa): 5 Elongation (%): 700 Tear strength (K N/m): 8 Model: HT-8140AT
Appearance: Translucent Processability: 220-240 Hardness (Shore A): 40 Density (g/cm3): 1.13 Tensile strength (Mpa): 7 Elongation (%): 750 Tear strength (K N/m): 40 Model: HT-8150AT
Appearance: Translucent Processability: 220-240 Hardness (Shore A): 50 Density (g/cm3): 1.14 Tensile strength (Mpa): 8 Elongation (%): 650 Tear strength (K N/m): 50 Model: HT-8160AT
Appearance: Translucent Processability: 230-260 Hardness (Shore A): 60 Density (g/cm3): 1.15 Tensile strength (Mpa): 8 Elongation (%): 550 Tear strength (K N/m): 50 Model: HT-8170AT
Appearance: Translucent Processability: 260-280 Hardness (Shore A): 70 Density (g/cm3): 1.2 Tensile strength (Mpa): 9 Elongation (%): 450 Tear strength (K N/m): 50 Model: HT-8180AT
Appearance: Translucent Processability: 250-280 Hardness (Shore A): 80 Density (g/cm3): 1.2 Tensile strength (Mpa): 8 Elongation (%): 300 Tear strength (K N/m): 40 Model: HT-8190AT
Appearance: Translucent Processability: 260-290 Hardness (Shore A): 90 Density (g/cm3): 1.22 Tensile strength (Mpa): 8 Elongation (%): 200 Tear strength (K N/m): 40