New generation TL-701HD 7 inch LCD small screen on camera monitor is a high resolution, wide view angle new type A+ class LCD panel, combining three patented technologies. So this is a multi-functional and professional LCD monitor. It could be widely used in film and TV field shooting.
Size | 7 inch |
Resolution | 1280(H)×800(V) |
Dot pitch | 0.117(H)×0.117(V)mm |
Aspect ratio | 16:9 / 4:3 switchable |
Brightness (max) | 400cd/m² |
Contrast (max) | 800:1 |
Response time | 12ms |
Viewing angle | H 178° / V 178° |
CVBS | BNC×1 |
3G-SDI | BNC×1 |
Component | BNC×3 |
HDMI | HDMI×1 |
CVBS | BNC×1 |
Component | BNC×3 |
3G-SDI | BNC×1 |
Analogue audio input | Stereo 2 RCA |
Audio demultiplexing | Support |
Audio meter | 16 channels (Maximum 8 channels can be displayed at one time) |
Speaker | 1×8Ω/0.5W(Pre) |
Headset | Support |
CVBS | PAL/NTSC |
Component | 480p/60, 480i/60, 576i/50, 576p/50, 720p(50/60), 1080i(/50/60), 1080p(24/25/30/50/60) |
HDMI | 480p/60, 480i/60, 576i/50, 576p/50, 720p(50/60), 1080i(/50/60), 1080p(24/25/30/50/60) |
3G-SDI | 1080p50/60 |
HD-SDI | 1080i/60/59.94/50, 1080p/30/29.97/25/24/24sF/23.98/23.98sF, 720p/60/59.94/50 |
SD-SDI | 480/59.94i, 576/50i |
Input voltage | DC 12V 4 pin XLR |
Power consumption (MAX) | ≤11W |
Working temperature | 0-40℃ |
Store temperature | -20-60℃ |
Store humidity | 0%-90% No condensation |
Shell material | ABS+PC |
Dimension (mm) | L 207×H 147×D 38.5mm |
Weight | About 1 kg |
Installation | Up/Down 1/4 inch screw, Left/Right M6 screw |
VESA connecting port | No |
The TL-701HD 7 inch LCD small screen on camera monitor has the following functions:
Function setting button, audio meter, safety marker, blue only, mono, aspect ratio, over scan, under scan, pixel-to-pixel (PTP), battery with display meter, safety lock
16 channels of digital audio signal can be embedded in the SDI audio signal. Normally, just displaying 8 channels can satisfy basic requirements. The Volume unit SDI (VU&PPM) is used for measuring audio levels and calibration. This is helpful for making sure that audio levels are within technical requirements and specifications. The data can be defined by customers according to requirements. It can be displayed vertically or horizontally.
The safety marker of Ruige can be defined from 80%-90% by customers to avoid image cutoffs caused by over scan during video play. The display safety issue is caused by over scan during video signal display on the video receiving and re-playing device.
The blue only is used for adjustment of the hue and saturation of the image. Meanwhile, it can be used to check the color calibration effect of the monitor.
Different aspect ratio can be chosen according to different signal formats to achieve perfect display effect.
During the making of the video program on net, the display mode and the equipment is the same with that during programming so there is no need to consider the limit of the safety marker with the over scan function. The image displayed on the monitor is that which will be seen by the terminal users.
Usage: Over scan is often used to programming for TV broadcast.
Because of the limit of monitor size and effective pixels, not all the monitors can show fully HD signal. So Ruige monitors use RPD technology (pixel to pixel function) to magnify image parts by parts to realize reappearing of 1080 original pixels.
Usage: This function can be used for the monitor with the resolution less than 1080. To view details, this function can avoid the loss of image detail due to lack of screen performance.
The safety lock can lock the function keys on the panel, thus avoiding poor shooting effect caused by mis-operation. When the system adjustment is done, just press the LOCK UP button for 3 seconds, the device will automatically enter the locked state. To remove the lock function, press the button for 3 seconds again. When the power is cut off, it remains locked, and will not automatically release.
DC-12V AC adapter
Input voltage: 100-240V ~0.8A 50/60HZ
Output voltage: DC-12V 2.0A
Certification: CE/FCC/3C/UL/ROHS etc.
D-tap power cable-4 pin
D-tap 4 pins XLR power cable adopts copper cable with dual core which is 0.75m2.
Universal adapter (Fluid head)
The universal adapter is made of aluminum alloy material. The small ball cradle head design enables easy installation of different angles.
Sun-hood-701
It is made by ABS+PC materials with patented integrated technology, so it is light and easy to use.
Used in promotion video propaganda shooting
Related
camera top monitor, video monitor, small LCD screen, monitor