Along with aluminum wires, pure aluminum wires and copper clad aluminum wires, we also supply a variety of alloy wires to our customers, each of which can be customized in specifications and packages.
Features
1. Aluminum wire features a bright surface
2. It has higher technical specifications than those set forth by industrial standards.
3. They are easy to weave
4. They are available in multiple diameters: 0.12mm, 0.155mm,0.16mm and 0.18mm, and are applicable to varieties of outer conductor braided wires on data cables for shielding.
5. Wires with a diameter greater than 1.17mm can be used for copper busbars electroplate busbars and more.
6. Customized specifications and packaging is available.
Our Advantages
1. Our alloy wires come with competitive price options and guaranteed quality.
2. Small orders are accepted here.
3. We supply free samples.
4. We also provide the wires in different dimensions.
5. We are certified to ISO9001 quality management system standards.
Technical Parameters | Spec. | Diameter Range | Conductivity | Tensile Strength | Elongation | Density |
| AL-MG Alloy Wire 5154 | 0.12mm -2.00mm | ±30% | ±160MPA | ≥6% | 2.70-2.85g/cm3 |
| Material | Continuous Casting 6101 Almelec Grade Aluminum Wire Rod |
| Guaranteed Chemical Composition | EN 1715 |
| Chemical Composition of Alloying Elements,% According to EN 573-3 | Other Impurities |
| Si | Fe | Cu | Mn | Mg | Zn | B | Each | Total |
| 0.3 | 0.1 | 0.05 | 0.05 | 0.35 | 0.01 | 0.003 | 0.03 | 0.1 |
| 0.6 | 0.3 | | | 0.6 | | | | |
| Dimensions, linear mass: 6101 alloy aluminum wire is available in the following diameters and unit weights. |
| Nominal Diameter | Deviation Range | Linear Mass |
| mm | mm | Kg/m |
| 9.5 | ±0.5 | 0.191 |
| The linear mass is calculated for the density of2.7 kg/dm3 |
| The cross-section of the wire rod is similar to a circle section and has three flattened sides. Wire ovality (the difference between the large and small dimensions of a section) will not exceed the value of the deviation range in table 2. |
| Alloy | Metallurgical | Mechanical Characteristics | Electric Characteristics Temperature20℃ |
| Denomination | delivery state | Tensile | Usual | Resistivity | Conductivity |
| | Strength | Elongation | µ cm | %IACS |
| | MPa | A100 | max. | min. |
| | Min. | % | | |
| 6101 T4 | Al Mg Si | 150 | 20 | 3.45 | 51.29 |
| Material | Continuous Casting 6201 Alloy Rod |
| Guaranteed Chemical Composition | EN 1715 |
| Chemical Composition of Alloying Elements,% According to EN 573-3 | Other Impurities |
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Each | Total |
| 0.5 | 0.5 | 0.01 | 0.03 | 0.6 | 0.03 | 0.01 | 0.03 | 0.1 |
| 0.9 | | | | 0.9 | | | | |
| Dimensions, linear mass: 6201 alloy aluminum wire is available in the following diameter and unit weight range. |
| Nominal Diameter | Deviation Range | Linear Mass |
| mm | mm | Kg/m |
| 9.5 | ±0.5 | 0.191 |
| The linear mass is calculated for the density of2.7 kg/dm3 |
| The cross-section of the wire rod is similar to a circle section and has three flattened sides. Wire ovality (the difference between the large and small dimensions of a section) will not exceed the value of the deviation range in table no 2. |
| Alloy | Metallurgical | Mechanical Characteristics | Electric Characteristics Temperature20℃ |
| Denomination | delivery state | Tensile | Usual | Resistivity | Conductivity |
| | Strength | Elongation | µ cm | %IACS |
| | MPa | A100 | Max. | Min. |
| | Min. | % | | |
| 6201 | AlMg0.7Si | 160 | 21 | 3.55 | 49.74 |
