UHMWPE Pipe Support

Send Message Request a Quote

These UHMWPE pipe supports are our custom UHMWPE machined plastic parts for pipeline installation and rack access. The engineering plastic blocks are specially installed in hot or cold pipe racks below the support bracket and then are double-bolt seat tube clamped. The plastic blocks are designed to absorb vibrations and help prevent wear to the pipeline system.

Characteristics of UHMWPE Pipe Supports
1. UHMWPE is water resistant
2. Non-Toxic
3. Low coefficient of friction
4. Corrosion resistant
5. Abrasion and impact resistant
6. Wear Resistant
7. Dielectric
8. Weatherproof

Technical Parameters

Property	ASTM Test	Units Metric (US)	Typical Values
Specific Gravity	D792	gm/cm°	0.926-0.934
Tensile strength at yield	D638	MPa (PSI)	21 (3100)
Tensile strength at break	D638	MPa (PSI)	48 (7000)
Elongation at break	D638	%	350
Young's ("E") modulus (23℃)	D638	MPa (PSI 105)	690 (1.0)
Young's ("E") modulus (-269℃)	D638	MPa (PSI 105)	2970 (4.3)
Izod impact strength (23℃)	D256(1)	J/m (ft-LBS/in notch)	140 (30)
Izod impact strength (-40℃)	D256(1)	J/m (ft-LBS/in notch)	100 (21)
Hardness, shore "D"	D2240	-	62-66
Abrasion resistance	(2)	-	100
Water absorption	D570	%	Nil
Relative solution viscosity	D4020	dl/gm	2.3-3.5
Density		(lbs./cubic in.)	.034

Specifications can be at your demands

Available type
UHMWPE Pipe support, UHMWPE cable support
As a specialized engineering plastic components and parts supplier, we can also supply HDPE pipe hangers and HDPE cable support kit.

These plastic brackets are used to separate, stabilize and support cables or pipes in a precast concrete trench or channel system to keep them steady.

Many hole sizes and configurations are available.

Scan QR to Read
Links：https://www.globefindpro.com/products/71061.html

Recommended Products