Main Characteristics of Automatic Die-Cutting Machine
1) Made of imported high-hardness die cut steel plate, our automatic die-cutting machine is durable and hard to damage.
2) The LCD screen can display various messages via dialog window; the functions of record and setting are available.
3) Feeder can fast and accurately begin sending the first sheet of paper in the high-speed operation.
4) Paper gripper unit of this post-press machine can ensure accuracy at high speed.
5) Main paper feed station can achieve left and right fine adjustment via electronically controlled operation.
6) Paper feed belt has slow-speed mechanism to guarantee the easy, fast and precise die-cutting of thin paper.
7) Feeder and collection unit are attached with non-stop mechanism and automatic subsidiary receiving trays, which can realize fast and automatic switchover.
8) Lubricating oil cooling system of our die cutter can solve the problem of uneven pressure caused by the thermal expansion and contraction so as to protect the parts from abrasion.
9) The die cutting pressure is showed by the electronically controlled digital display, making the operation easy, clear and fast.
10) If the die cutting pressure exceeds 300 tons, our die-cutting machine will automatically shutdown to ensure mechanical safety.
11) The pneumatic clamping frame is quick and easy to operate.
12) Consisting of parts imported from Europe, the main chain of our paper cutting machine is durable and hard to damage.
Technical Data of Automatic Die-Cutting Machine
Maximum paper size | 1,050mm×750mm |
Minimum paper size | 400mm×360mm |
Maximum die cutting size | 1,040mm×730mm |
Maximum die cutting pressure | 300tons |
Die cut paper weight | 80-2,000g/m² |
Die cut corrugated paper thickness | ≤4mm |
Minimum paper width | 9.5mm |
Maximum die cutting speed | 7,500 Pieces/ Hour |
Total power | 23kw |
Clamping frame size | 1,145mm×755mm |
Steel plate size | 1,080mm×736mm |
Total length | 7,015mm |
Total width | 4,200mm |
Total height | 2,400mm |
Total weight | 16tons |
Collection Unit of Automatic Die-Cutting Machine
1. The brush and side-blow method are used to ensure neat and tidy paper collection.
2. If the paper collection is full while the whole die-cutting system is running, the collection unit can realize non-stop automatic preparation.
3. The quantity of paper sheets to be collected can be randomly set; there is an insertion unit for marked paper slips.
4. The total amount of paper sheets to be collected before automatic shutdown can be set.
Feeder of Automatic Die-Cutting Machine
Equipped with four suction nozzles and four scroll wheels, our strong feeder system can ensure smooth feeding of both thin papers and thick papers.
Trombone and Conveyor of Automatic Die-Cutting Machine
1. The horizontal positioning device has push-pull dual-use mechanism, facilitating the paper switchover and paper selection.
2. Two front-positioning devices can make front-back adjustment during operation.
3. The conveying will be stopped if error is detected by the detection device during paper feeding.
4. The horizontal positioning accuracy can be calibrated before paper feeding.
5. A belt-conveyor device can guarantee the thin paper to be conveyed stably and accurately.
Control Unit of Automatic Die-Cutting Machine
This control unit comes with imported components from Japan and features dual speed regulation, high-speed running and accurate control.
Waste Discharge Unit of Automatic Die-Cutting Machine
1. With needles at the top and the bottom, this waste discharge unit is easy to assemble and disassemble quickly and conveniently.
2. The upper mechanism can be separately lifted and operated according to actual needs.