Wet Wire Drawing Machine (22 Drawing Dies)

Send Message Request a Quote

The wet wire drawing machine comes with 22 drawing dies and reaches a maximum trial run speed of 20m/s. This metalworking machine can draw high carbon steel wires with a diameter range of 0.7mm-1.0mm. With a PLC controller and touch screen, this wet drawing equipment is easy to operate.

The wire arranging unit for the wet drawing machine is independently driven by a servo motor so that space between wires can be adjusted at will. An automatic compensating function ensures precision wire arrangement. Step pulleys of this wet wire drawing machine are coated with WC for a high surface hardness of HR62±2 and longer lifespan.

Wet Wire Drawing Machine (22 Drawing Dies)

As an expert in steel wire and cable manufacturing machinery, we can provide not only steel wire drawing machines, but also many other steel wire machinery. We welcome you to contact us for more details.

Technical Parameters of the 22-Die Wet Wire Drawing Machine

Type	Vertical water tank, spraying and submerged lubrication
Drawing material	High carbon steel wire
No. of Drawing die	22
Max. Speed	20m/s
Mechanical compression ratio	15% of 21 foregoing dies, 8% of one outlet die
Inlet wire diameter	φ0.70mm- φ 1.1mm
Finished wire diameter	φ0.1mm- φ 0.14mm
Inlet drawing strength	1350Mpa-1500Mpa
Outlet drawing strength	3200Mpa-3800Mpa
Step pulley surface condition	WC coating; Hardness: HRC62 ± 2
Main motor	15KW
Take-up driving motor	5.5KW
Wire arranging method	Driven by servo motor with synchronous belt; Power: 0.4KW Automatic wire arranging Compensating function
Speed adjustment mode	AC variable frequency continuous speed control
Electric control mode	PLC controller, with touch screen and automatic protection
Noise	≤85db
Machine size	2600×1910×1985mm